Matala lavetti perävaunuMÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
Matala lavetti perävaunu
MÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
kiinteä hinta ei sisällä ALV
27 950 €
(33 260 € bruttomassa)
Valmistusvuosi
2026
Kunto
Uusi
Sijainti
Egestorf 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
27 950 €
(33 260 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 10 760 kg
- Kokonaispaino:
- 14 400 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 6 270 mm
- Lastitilan leveys:
- 2 470 mm
- Kuormatilan korkeus:
- 400 mm
Tarjouksen tiedot
- Listaustunnus:
- A200-96-225
- Viitenumero:
- 5911 b
- Päivitetty viimeksi:
- 05.02.2026
Kuvaus
* ETÜ-TA-R 14.4:
----Brakes:
Cedjxglibjpfx Ahxjpu
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Draw Eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm (total length 2,250 mm)
* 40 mm flange draw eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General Attachments:
* Jost landing gear at the front
* Externally mounted hot-dip galvanized folding supports at the rear
* Plastic toolbox at the front right outside on the bulkhead
* Side underrun protection
* Quarter plastic mudguards
----Low Loader Deck:
* 50 mm softwood floor
* Preparation at the front bulkhead for retrofitting container locks
* Bolted smooth steel bulkhead
* Fold-down side panels made from trapezoidal-profiled steel sheet with drop-side lifting assist
* Retractable steel tailgate between the ramps (storage bracket inside in the front when not in use)
* Bolted rear posts
----Load Securing:
* Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Option for 3 t drop lashing rings every 600 mm
* One 6.3 t lashing ring in each front and rear corner
* Various bores in the front and rear cross-members for 1.2 t lashing points
----Ramps:
* One-piece mechanical mesh access ramps with spring assist for single-person operation approx. 2,750 x 600 mm (can be retracted to 20 mm)
* Rear approach slope approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis, drawbar, front bulkhead, access ramps, and rear wall
* Drop-side color in RAL 2011 deep orange
* Side panels can be painted in any RAL color for an extra charge
----Info:
* Reinforced and certified body as per EN 12642 XL, including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to prior sale and errors excepted
----Delivery Time:
* Available from calendar week 08/2026
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
----Brakes:
Cedjxglibjpfx Ahxjpu
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Draw Eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm (total length 2,250 mm)
* 40 mm flange draw eye
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General Attachments:
* Jost landing gear at the front
* Externally mounted hot-dip galvanized folding supports at the rear
* Plastic toolbox at the front right outside on the bulkhead
* Side underrun protection
* Quarter plastic mudguards
----Low Loader Deck:
* 50 mm softwood floor
* Preparation at the front bulkhead for retrofitting container locks
* Bolted smooth steel bulkhead
* Fold-down side panels made from trapezoidal-profiled steel sheet with drop-side lifting assist
* Retractable steel tailgate between the ramps (storage bracket inside in the front when not in use)
* Bolted rear posts
----Load Securing:
* Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Option for 3 t drop lashing rings every 600 mm
* One 6.3 t lashing ring in each front and rear corner
* Various bores in the front and rear cross-members for 1.2 t lashing points
----Ramps:
* One-piece mechanical mesh access ramps with spring assist for single-person operation approx. 2,750 x 600 mm (can be retracted to 20 mm)
* Rear approach slope approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis, drawbar, front bulkhead, access ramps, and rear wall
* Drop-side color in RAL 2011 deep orange
* Side panels can be painted in any RAL color for an extra charge
----Info:
* Reinforced and certified body as per EN 12642 XL, including load securing certificate
* New vehicle with manufacturer's warranty
* Subject to prior sale and errors excepted
----Delivery Time:
* Available from calendar week 08/2026
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2001
Lähetä pyyntö
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Pieni ilmoitus
Egestorf
1 343 km
Matala lavetti perävaunu
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Pieni ilmoitus
Egestorf
1 343 km
Matala lavetti perävaunu
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Pieni ilmoitus
Egestorf
1 343 km
Matala lavetti perävaunu
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Pieni ilmoitus
Egestorf
1 342 km
Työalustallinen perävaunu
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe
























































































































