Matala lavetti perävaunuMÜLLER-MITTELTAL
14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Matala lavetti perävaunu
MÜLLER-MITTELTAL
14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
kiinteä hinta ei sisällä ALV
29 900 €
(35 581 € bruttomassa)
Valmistusvuosi
2025
Kunto
Uusi
Sijainti
Egestorf 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
29 900 €
(35 581 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 10 750 kg
- Kokonaispaino:
- 14 400 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 7 000 mm
- Lastitilan leveys:
- 2 470 mm
- Kuormatilan korkeus:
- 400 mm
Tarjouksen tiedot
- Listaustunnus:
- A186-10-241
- Viitenumero:
- 6180
- Päivitetty viimeksi:
- 12.07.2025
Kuvaus
* ETÜ-TA-R 14.4:
* RDÜ Tire Pressure Monitoring System
* EBS Braking System
* Emergency Release for Spring Brake Cylinders
* Drum Brakes
* 2 x 7 t Gigant Axles
* Parabolic Springs with Equalizing Unit
* Drawbar height-adjustable by approx. 300 mm – drawbar extension by 250 mm to a total of 2,250 mm
* 15-pin electrical connector
* LED Lighting
Bodpov D Tcbofx Aaxjww
* Support crank at front
* Folding external stabilizer legs at rear
* Plastic tool box approx. 858 x 500 x 500 mm mounted front right outside on the front wall
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Fixture in front of front wall and rear slope for subsequent installation of container locks for transporting 20" containers
* Bolt-on smooth sheet front wall
* Side walls made of trapezoidal profile steel sheet, drop-down, divided once in the middle
* Steel rear wall, slidable between the ramp brackets, can be stored inside in front of the front wall when not in use
* Rear stanchions bolted
* Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm, provision for installation of 3 t folding lashing rings every 600 mm, 1 x 6.3 t lashing ring each in the front and rear corners, various holes in the front and rear cross members for 1.2 t lashing options
* One-piece mechanical grating approach ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Approach slope at rear approx. 860 mm on chassis
* Drawbar, front wall, tailgate, folding supports, and approach ramps hot-dip galvanized
* --- Axles, springs, air tanks, flange coupling, and support crank painted in black ---
* Reinforced and certified structure according to EN 12642 XL incl. load securing certificate --
* Wheelbase 1,140 mm
* Bodywork painted in RAL 9010 pure white
* Body sides can be painted in a RAL color at extra charge
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from CW 47/2025
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
* RDÜ Tire Pressure Monitoring System
* EBS Braking System
* Emergency Release for Spring Brake Cylinders
* Drum Brakes
* 2 x 7 t Gigant Axles
* Parabolic Springs with Equalizing Unit
* Drawbar height-adjustable by approx. 300 mm – drawbar extension by 250 mm to a total of 2,250 mm
* 15-pin electrical connector
* LED Lighting
Bodpov D Tcbofx Aaxjww
* Support crank at front
* Folding external stabilizer legs at rear
* Plastic tool box approx. 858 x 500 x 500 mm mounted front right outside on the front wall
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Fixture in front of front wall and rear slope for subsequent installation of container locks for transporting 20" containers
* Bolt-on smooth sheet front wall
* Side walls made of trapezoidal profile steel sheet, drop-down, divided once in the middle
* Steel rear wall, slidable between the ramp brackets, can be stored inside in front of the front wall when not in use
* Rear stanchions bolted
* Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm, provision for installation of 3 t folding lashing rings every 600 mm, 1 x 6.3 t lashing ring each in the front and rear corners, various holes in the front and rear cross members for 1.2 t lashing options
* One-piece mechanical grating approach ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Approach slope at rear approx. 860 mm on chassis
* Drawbar, front wall, tailgate, folding supports, and approach ramps hot-dip galvanized
* --- Axles, springs, air tanks, flange coupling, and support crank painted in black ---
* Reinforced and certified structure according to EN 12642 XL incl. load securing certificate --
* Wheelbase 1,140 mm
* Bodywork painted in RAL 9010 pure white
* Body sides can be painted in a RAL color at extra charge
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from CW 47/2025
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2001
Lähetä pyyntö
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe



































































