Matala lavetti perävaunuMÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
Matala lavetti perävaunu
MÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
Kiinteä hinta alv 0% (veroton)
28 700 €
(34 153 € bruttomassa)
Valmistusvuosi
2026
Kunto
Uusi
Sijainti
Egestorf 

Perustiedot
Hinta ja sijainti
Kiinteä hinta alv 0% (veroton)
28 700 €
(34 153 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 10 760 kg
- Kokonaispaino:
- 14 400 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 6 270 mm
- Lastitilan leveys:
- 2 470 mm
- Kuormatilan korkeus:
- 400 mm
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A144-06-193
- Viitenumero:
- 59111 a
- Päivitys:
- viimeksi 09.07.2026
Kuvaus
* ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7-ton Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange coupling:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange coupling
----Lighting / Electrical system:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General components:
* Jost front support jacks
* External, hot-dip galvanized folding support legs at the rear
* Plastic toolbox on the front right side, attached to the front wall
* Side impact protection
* Plastic quarter fenders
----Low-bed platform:
* 50 mm softwood flooring
* Provision in front of the front wall for subsequent installation of container locking devices
* Bolted front wall made of smooth sheet metal
* Steel side walls - trapezoid profile - foldable with side board spring lifts
* Steel rear wall can be slid in between the ramps - bracket for storage when not in use, inside the front wall
* Rear crossmembers bolted
----Load securing:
* Perforated outer frame, angled at approximately 45 degrees, with 2-ton lashing force every 480 mm
* Installation of 3-ton eye lashing brackets every 600 mm possible
* At the front and rear corners, 1 x 6.3-ton lashing point each
* Various holes in the front and end beams for 1.2-ton lashing options
* Profifix lashing rail in the center of the longitudinal axis for lashing options up to LC 3000 daN
----Ramps:
Iodpfx Asq Dyvvjp Hjif
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approximately 2,750 x 600 mm (can be slid together to 20 mm)
* Approach angle at the rear, approximately 860 mm
----Painting:
* Hot-dip galvanized chassis, drawbar, front wall, ramps, and rear wall
* Side board color in RAL 9010 pure white
* Painting of the side walls in a RAL color possible for an extra charge
----Information:
* Reinforced and certified body according to EN 12642 XL including load securing certificate
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Immediately available from Egestorf
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
----Brakes:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
----Axles:
* 2 x 7-ton Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange coupling:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange coupling
----Lighting / Electrical system:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General components:
* Jost front support jacks
* External, hot-dip galvanized folding support legs at the rear
* Plastic toolbox on the front right side, attached to the front wall
* Side impact protection
* Plastic quarter fenders
----Low-bed platform:
* 50 mm softwood flooring
* Provision in front of the front wall for subsequent installation of container locking devices
* Bolted front wall made of smooth sheet metal
* Steel side walls - trapezoid profile - foldable with side board spring lifts
* Steel rear wall can be slid in between the ramps - bracket for storage when not in use, inside the front wall
* Rear crossmembers bolted
----Load securing:
* Perforated outer frame, angled at approximately 45 degrees, with 2-ton lashing force every 480 mm
* Installation of 3-ton eye lashing brackets every 600 mm possible
* At the front and rear corners, 1 x 6.3-ton lashing point each
* Various holes in the front and end beams for 1.2-ton lashing options
* Profifix lashing rail in the center of the longitudinal axis for lashing options up to LC 3000 daN
----Ramps:
Iodpfx Asq Dyvvjp Hjif
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approximately 2,750 x 600 mm (can be slid together to 20 mm)
* Approach angle at the rear, approximately 860 mm
----Painting:
* Hot-dip galvanized chassis, drawbar, front wall, ramps, and rear wall
* Side board color in RAL 9010 pure white
* Painting of the side walls in a RAL color possible for an extra charge
----Information:
* Reinforced and certified body according to EN 12642 XL including load securing certificate
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Immediately available from Egestorf
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2001
171 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Pieni ilmoitus
Egestorf
1 342 km
Työalustallinen perävaunu
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Pieni ilmoitus
Egestorf
1 343 km
Matala lavetti perävaunu
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
Pieni ilmoitus
Egestorf
1 343 km
Matala lavetti perävaunu
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Pieni ilmoitus
Egestorf
1 343 km
Matala lavetti perävaunu
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Pieni ilmoitus
Bovenden
1 493 km
Rullakontti
Abrollcontainer mit Flügeltür ca. 20m³
Abrollcontainer mit Flügeltür ca. 20m³
Pieni ilmoitus
Egestorf
1 343 km
Matala lavetti perävaunu
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe
















































































































































