Matala lavetti perävaunuMÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
Matala lavetti perävaunu
MÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
kiinteä hinta ei sisällä ALV
27 950 €
(33 260 € bruttomassa)
Valmistusvuosi
2026
Kunto
Uusi
Sijainti
Egestorf 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
27 950 €
(33 260 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 10 760 kg
- Kokonaispaino:
- 14 400 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 6 270 mm
- Lastitilan leveys:
- 2 470 mm
- Kuormatilan korkeus:
- 400 mm
Tarjouksen tiedot
- Listaustunnus:
- A152-54-665
- Viitenumero:
- 5911 a
- Päivitetty viimeksi:
- 05.02.2026
Kuvaus
* ETÜ-TA-R 14.4:
---- Brakes:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring brake actuators
---- Axles:
* 2 x 7 t Gigant axles
---- Suspension:
* Parabolic springs with compensating unit
---- Drawbar / Flange towing eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange towing eye
---- Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
---- General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized foldable support legs at the rear
* Plastic toolbox, fitted externally at the front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
---- Lowbed deck:
* 50 mm softwood floor
* Preparation in front of bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth steel sheet
* Side walls made of steel, trapezoidal profile, foldable, with drop-side spring assist
* Rear wall made of steel, retractable between the ramps – bracket for storage when not in use, fitted inside at the front bulkhead
* Removable bolted rear stanchions
---- Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* 1 x 6.3 t lashing point in each of the four corners (front/rear)
* Various boreholes in the front and end crossmember for 1.2 t lashing options
---- Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be slid together up to 20 mm)
* Rear approach angle approx. 860 mm
---- Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps, and rear wall
* Side panel color RAL 9010 pure white
* Side wall painting in any RAL color available for an additional charge
---- Information:
* --Reinforced and certified body as per EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer's warranty
Djdpfxjrvvflo Ahxocc
* Errors and prior sale excepted
---- Delivery time:
* Available from week 08/2026
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
---- Brakes:
* Drum brakes
* Electronic braking system (EBS)
* Emergency release device for spring brake actuators
---- Axles:
* 2 x 7 t Gigant axles
---- Suspension:
* Parabolic springs with compensating unit
---- Drawbar / Flange towing eye:
* Height-adjustable drawbar, adjustable by 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange towing eye
---- Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
---- General attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized foldable support legs at the rear
* Plastic toolbox, fitted externally at the front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
---- Lowbed deck:
* 50 mm softwood floor
* Preparation in front of bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth steel sheet
* Side walls made of steel, trapezoidal profile, foldable, with drop-side spring assist
* Rear wall made of steel, retractable between the ramps – bracket for storage when not in use, fitted inside at the front bulkhead
* Removable bolted rear stanchions
---- Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* 1 x 6.3 t lashing point in each of the four corners (front/rear)
* Various boreholes in the front and end crossmember for 1.2 t lashing options
---- Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be slid together up to 20 mm)
* Rear approach angle approx. 860 mm
---- Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps, and rear wall
* Side panel color RAL 9010 pure white
* Side wall painting in any RAL color available for an additional charge
---- Information:
* --Reinforced and certified body as per EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer's warranty
Djdpfxjrvvflo Ahxocc
* Errors and prior sale excepted
---- Delivery time:
* Available from week 08/2026
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2001
Lähetä pyyntö
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Pieni ilmoitus
Egestorf
1 343 km
Matala lavetti perävaunu
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Pieni ilmoitus
Egestorf
1 343 km
Matala lavetti perävaunu
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Pieni ilmoitus
Egestorf
1 343 km
Matala lavetti perävaunu
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Pieni ilmoitus
Egestorf
1 342 km
Työalustallinen perävaunu
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe
























































































































