Matala lavetti perävaunuMÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
Matala lavetti perävaunu
MÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
kiinteä hinta ei sisällä ALV
27 950 €
(33 260 € bruttomassa)
Valmistusvuosi
2026
Kunto
Uusi
Sijainti
Egestorf 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
27 950 €
(33 260 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 10 760 kg
- Kokonaispaino:
- 14 400 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 6 270 mm
- Lastitilan leveys:
- 2 470 mm
- Kuormatilan korkeus:
- 400 mm
Tarjouksen tiedot
- Listaustunnus:
- A200-96-220
- Viitenumero:
- 59111 b
- Päivitetty viimeksi:
- 05.02.2026
Kuvaus
* ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic brake system (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
Gjdpfsxglh Rox Ahxebh
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General Attachments:
* Jost landing gear front
* Externally mounted, hot-dip galvanized folding supports rear
* Plastic toolbox, front right, mounted externally on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation in front of the bulkhead for subsequent installation of container locks
* Screw-fastened bulkhead of smooth sheet metal
* Side walls made of trapezoidal steel sheet, drop-down with drop side spring lifter
* Steel tailgate, retractable between ramps – rack for idle position mounted inside on the bulkhead
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings possible every 600 mm
* Each front and rear corner equipped with 1 x 6.3 t lashing ring
* Various holes in the front and rear crossmembers for 1.2 t lashing options
----Ramps:
* One-piece mechanical grid ramps with spring unit, suitable for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm)
* Approach bevel at the rear approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis, drawbar, bulkhead, access ramps and rear wall
* Drop side colour in RAL 2011 deep orange
* Painting of side walls in any RAL colour available at extra cost
----Info:
* -- Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate --
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from week 08/2026
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
----Brakes:
* Drum brakes
* Electronic brake system (EBS)
* Emergency release device for spring-loaded cylinders
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
Gjdpfsxglh Rox Ahxebh
----Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----General Attachments:
* Jost landing gear front
* Externally mounted, hot-dip galvanized folding supports rear
* Plastic toolbox, front right, mounted externally on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood floor
* Preparation in front of the bulkhead for subsequent installation of container locks
* Screw-fastened bulkhead of smooth sheet metal
* Side walls made of trapezoidal steel sheet, drop-down with drop side spring lifter
* Steel tailgate, retractable between ramps – rack for idle position mounted inside on the bulkhead
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing rings possible every 600 mm
* Each front and rear corner equipped with 1 x 6.3 t lashing ring
* Various holes in the front and rear crossmembers for 1.2 t lashing options
----Ramps:
* One-piece mechanical grid ramps with spring unit, suitable for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm)
* Approach bevel at the rear approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis, drawbar, bulkhead, access ramps and rear wall
* Drop side colour in RAL 2011 deep orange
* Painting of side walls in any RAL colour available at extra cost
----Info:
* -- Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate --
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from week 08/2026
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2001
Lähetä pyyntö
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Pieni ilmoitus
Egestorf
1 343 km
Matala lavetti perävaunu
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Pieni ilmoitus
Egestorf
1 343 km
Matala lavetti perävaunu
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Pieni ilmoitus
Egestorf
1 343 km
Matala lavetti perävaunu
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Pieni ilmoitus
Egestorf
1 342 km
Työalustallinen perävaunu
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe
























































































































