Kippipuoliperävaunu

FLIEGL ZHKS 350 Stone Master - 27 m³

The images shown are archive photos; the vehicle may still be in use!

Chassis for Tipper Semi-Trailer
Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin and two kingpin positions
Kingpin installed in the forward position
Curved front panel (patented)
24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower section and straight mounting plate, with drawbar equalizer
Unhitching under load is not possible; when unhitched, the vehicle must stand with a rearward slope.
Free rear swing clearance approx. 2100 mm in the rear position and approx. 2600 mm in the forward position!
Wheel chocks with holder
Aluminum side underrun protection
Foldable rear underrun protection
Rear underrun protection with spring assist for easier operation
Half-shell fenders
Splash guards behind the last axle in asphalt design, hinged on the fender, with hook-up option at the top of the fender, fender shortened
Tarp bar with holder
Tow hook at the rear (not for Revolution model)
Axles & Suspension
BPW or SAF drum brake axles, manufacturer’s option
Axles in off-road version
"Axles/chassis laser measured" to reduce tire wear and fuel consumption
Air suspension
1st axle with automatic lift axle, including forced lowering and starting aid, operation via "3x braking" (starting aid functions up to a 30% axle overload and up to a max. speed of 25 km/h)
"Hot-dip galvanized lift axle mechanism" 10-year rust-through warranty
Braking System
2-line compressed air braking system
Color-coded lines for easier servicing.
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front, without connecting line
Cpodpfxsx Dkpns Afpsw
24 Volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable
Attention: The trailer may only be towed by traction vehicles capable of ensuring ABS function!
With lift & lower valve
Vehicle stability control system
Paver brake, electrically controlled from the truck, without truck installation
Automatic tipping lowering with shut-off valve
Wheels and Tires
385/65 R22.5, manufacturer’s option
Steel rims, factory silver
Electrics
24 Volt, multi-chamber taillights, yellow LED side marker lights
2 white LED front position lights
2 white/red lane marker lights at the rear
1 x 15-pin socket at the front, without connecting cable
1 LED spotlight with integrated "Osprey" camera as trough camera (technical inspection required upon order)
LED strobe light(s) at rear, controlled via switch in the truck, without truck installation, wired to pin 12
Upon order, specify pin allocation!
Reversing camera system with color flat-screen monitor, wireless connection to monitor, monitor with suction mount and power supply via 24V vehicle socket
Registration/Country & Plates
Germany
With Dekra approval and certificate (per §13 EC-FGV)
24/7 Service Hotline
Body stability to EN 12642
Prepared for single-line license plate holder
Conspicuity markings with reflective tape to ECE R 048, white at the side and red at the rear
Paintwork
Frame: DB 7350 Novagrau
"10-year rust-through warranty"
Landing legs: Black coated
Body/Side panel: Scania Urban Grey 2389173
Sliding tarp: RAL 7038 Agate Grey

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.