Matala lavettipuoliperävaunu

MÜLLER-MITTELTAL 3-achs mit Radmulden, 2 Ladehöhen, Klapprampen

* TS 3 RM ML 30.0:
* Wabco-EBS-E (electronic braking system)
* Emergency release mechanism for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW axles
* Air suspension with lift and lower system and RtR valve
* Start-up assistance for shunting operations activated on the first axle via EBS (without truck-side installation)
* Smart-Board infotool mounted on the trailer with pressure sensors for total axle load display
* Last axle as trailing steering axle with electro-pneumatic steering lock
* Locking of the trailing axle from the cab for shunting operations via EBS (without truck-side installation)
* 2nd king pin position 2
* Side underrun protection, front landing legs, and rear swing supports on the chassis
Dcodpfx Aetpta Dshxsc
* 15-pin electrical connector
* LED lighting 12 / 24 V
* LED rotating beacon (removable) at the rear
* 2 additional LED reversing lights
* 7-pin socket at the rear for overlength lighting
* Side marker lights with indicator control
* Tire pressure monitoring with the option for display in the truck via EBS signal (without truck-side installation)
* Mechanically adjustable warning board sets at the front and rear
* Straight steel sheet mudguards
* Spare wheel holder in front of the front wall crossmember (without spare wheel)
* Semi-trailer platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel, dimensions W = 2,480 x H = 500 x L = 665 mm, with folding lid
* Semi-trailer platform with 400 mm high aluminum side walls (RAL color of choice), foldable and removable
* Rear wall -150 mm- fitted
* Rear slope on the semi-trailer platform to the lowbed approx. 700 mm long with tread plate covering and perforated strip for attaching aluminum loading ramps at the end
* Semi-trailer platform with 50 mm clamped wooden planks, and lowbed platform with 60 mm clamped wooden planks
* Checker plate above the axles
* 9 x mechanical fold-out wideners for overall width up to 3 m, excluding rear slope (widening planks provided with lockable transverse storage compartment under the load area)
* 3 storage compartments under the semi-trailer platform for storing optional aluminum loading ramps or wooden planks for wheel recess covers
* Swing arm as a carrier for connection lines from the truck to the trailer
* Load securing package consisting of: perforated outer frame on the semi-trailer platform, angled at 45°, with hole pattern for lashing equipment (2 t lashing force per lashing point with a minimum spacing of 480 mm)
* 3 x 13.4 t flush-mounted lashing rings on each side (1 on the semi-trailer platform, 1 on the longitudinal beams after the cranking, 1 above the middle axle next to the longitudinal beam)
* 3 x 13.4 t lashing rings on each side of the outer frame (1 at the beginning of the semi-trailer platform cranking, 1 at the beginning of the approach slope, 1 at the end of the approach slope)
* 2 x 10 t lashing rings on each side (1 between the front wheel recess and 1st axle, and 1 between 2nd and 3rd axle)
* 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess)
* Extended excavator stick storage tray, continuous from the end of the last fixed axle over the steering axle up to the end crossmember, with internal reinforcement profile approx. W = 770 mm x Rear depth = 270 mm / Front depth 170 mm, with 2 x 6.4 t lashing rings on each side in the excavator stick tray
* 2 wheel recesses each side, 390 mm deep and 640 mm wide

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.