Matala lavettipuoliperävaunu

MÜLLER-MITTELTAL 3- achs Satteltiefl.-Luft-Lenk,hydr. Auffahrram.

* TS 3 Profile 30.0:

----Brakes:

* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes

----Axles:

* 3 x 11 to BPW Eco Plus axles
* Last axle with trailing steering and electropneumatic steering lock

----Suspension:

* Air suspension with lifting and lowering system and RtR valve

----Electrical System / Lighting:

* TPMS (Tire Pressure Monitoring System)
* Smartboard control box mounted on the trailer as an information tool, with pressure sensors for total axle load display
* 15-pin electrical connector
* LED lighting system 12 / 24V
* LED rotating beacon (detachable) at the rear left

----General Components:

* Side underrun protection
* Support winch at the front and mechanical swivel supports at the rear of the chassis
* Straight steel sheet fenders
* Spare wheel holder under the chassis on the right side

----Low-loader Platform:

* Fifth wheel platform with 45° angled front corners and a tool box at the front made of galvanized steel sheet, B = 2,480 x H = 500 x L = 665 mm, with a hinged cover
* 400 mm aluminum side panels (RAL 9010 pure white) on the fifth wheel platform, foldable and removable
* Rear panel -150 mm- high, mounted
* Rear slope on the fifth wheel platform for the low-bed, approx. 700 mm long
Bodpel Tnvgefx Agdodh
* Fifth wheel platform with 50 mm wooden planks and low-loader platform with 60 mm wooden planks
* Checker plate over the axles

----Extensions:

* 8 x mechanical, foldable extensions to 3 m overall width, but not in the rear slope (extension planks available with storage on the fifth wheel platform)
* Mechanically adjustable warning sign packages at the front and rear

----Load Securing (Lasi Package):

* 2 x 6.3 to lashing points on each side of the fifth wheel platform and 3 x 5 to lashing rods on the outside frame
* 2 x 13.4 to lashing points on each side of the low-loader platform and 4 x 10 to lashing points, swiveling and lowering, recessed in the outside frame
* 2 x 6.4 to lashing eyelets on each side and 1 lashing point at the rear in the excavator arm rest
* 2 x container locks directly after the bend in the low-loader platform

----Excavator Arm Rest:

* Excavator arm rest from the end of the last fixed axle over the steering axle to the end beam, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm

----Ramps:

* Mechanical, one-piece, hot-dip galvanized, hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable on the side)
* Control block, 4-way, for later customer retrofitting of hydraulic ramp displacement
* The outer plank on the ramp is made of 50 mm hardwood
* Climbing strips on the outer frame of the ramp and in the approach slope

----Hydraulics:

* Hydraulic divider in the trailer (with hydraulic pump performance in the truck over 40 liters up to 120 liters / min.)

----Loading Dimensions:

* Loading area of the fifth wheel platform: approx. 3,935 x 2,480 mm
* Low-bed loading area: approx. 8,500 x 2,520 mm
* Unladen loading height approx. 910 mm (incl. 860 mm approach slope)

----Fifth Wheel Height:

* approx. 1,220 mm (suitable for 2- and 3-axle semi-trailers)

----Painting:

* Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized
* Axles, support winch, air tank painted in black
* Vehicle is hot-dip galvanized

----Information:

* New vehicle with manufacturer's warranty
* Errors and prior sale excepted

----Delivery Time:

* Available for immediate delivery from Egestorf near

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.