Työalustallinen puoliperävaunu

MÜLLER-MITTELTAL 3-achs mit Radmulden, 2 Ladehöhen, Klapprampen

* TS 3 RM ML 30.0:

----Brakes:

* Wabco EBS-E (electronic braking system)
* Emergency release system for spring brake cylinders
* Drum brakes

----Axles:

* 3 x 11 t BPW axles
* Start-assist for shunting purposes activated on the first axle via EBS (without truck-side installation)
* Last axle is a trailing steered axle with electro-pneumatic steering lock
* Trailing axle lock for shunting purposes activated from the cab via EBS (without truck-side installation)

----Suspension:

* Air suspension with lifting and lowering function plus RtR valve

----Electrics / Lighting:

* Smart-Board information panel mounted on the trailer with pressure sensors for total axle load display
* 15-pin power connector
* LED lighting 12 / 24 V
* Removable LED warning beacon at the rear
* 2 additional LED reversing lights
* 7-pin socket at the rear for overlength lighting
* Side marker lights with indicator circuit
* Tire pressure monitoring with display option in truck via EBS signal (without truck-side installation)

----General Attachments:

* Side underrun protection
* Landing gear at front plus rear swing-down supports on the chassis
* Straight steel mudguards
* Spare wheel holder in front of the bulkhead crossmember (without spare wheel)
* Mechanically adjustable warning sign kits at front and rear
* Swivel arm as a carrier for connection cables from truck to trailer

----Low Loader Deck:

* Second king pin position
* Saddle platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid
* 400 mm high aluminum drop sides (painted in RAL color of choice) on saddle platform, foldable and removable
* Removable rear wall -150 mm high
* Rear slope at saddle platform to low bed approx. 700 mm long with chequer plate covering, as well as lashing bar with holes for attaching aluminum loading ramps
* Saddle platform with 50 mm clamped timber planks and low bed platform with 60 mm clamped timber planks
Ihedsykx Nkopfx Ahxsu
* Tread plate above the axles
* 9 mechanical folding extensions to 3 m total width (not over rear slope; extension planks available, with closed transverse storage compartment under loading area)
* Prepared for 3 mounting slots under saddle platform for storing optional aluminum loading ramps or timber planks for wheel well covers
* Prepared for container locks on gooseneck

----Load Securing (LaSi Package):

Saddle platform:

* Perforated outer frame with 45°-angled holes for lashing points (2 t lashing force per point, minimum 480 mm apart)
* 3 x 13.4 t lashing rings recessed into the floor on each side (one on the saddle platform, one on the longitudinal beams after the step, one over the middle axle next to the beam)

Low Loader Platform:

* 3 x 13.4 t lashing rings on the outer frame on each side (beginning of platform step, start and end of ramp slope)
* 2 x 10 t lashing rings per side (between front wheel recess and 1st axle, between 2nd and 3rd axle)
* 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front, 1 at the rear wheel recess)

----Excavator Arm Trough:

* Extended excavator arm trough from the end of the last rigid axle over the steering axle up to the end crossmember, continuous with internal reinforcement, approx. W = 770 mm x Depth (rear ...

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.