Matala lavettipuoliperävaunu

MÜLLER-MITTELTAL 3- achs Sattel.-Luft-Lenk,hydr. Rampe mit Gummi

* TS 3 Profile 30.0:

----Brakes:

* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes

----Axles:

* 3 x 11 t BPW Eco Plus axles
Cgjdpfx Asy Ngzyjifjt
* Rear axle steerable with electro-pneumatic steering lock

----Suspension:

* Air suspension with lifting/lowering function and RtR valve

----Electrics / Lighting:

* Tire pressure monitoring system (TPMS)
* Smartboard control box mounted on the trailer as an info tool with pressure sensors for total axle load display
* 15-pin power connector
* LED lighting system 12 / 24V
* Removable LED beacon at the rear left

----General Attachments:

* Side underrun protection
* Landing gear at the front and mechanical swing supports at the rear of the chassis
* Straight steel sheet mudguards
* Spare wheel holder under the chassis, right side

----Low-loader platform:

* Saddle platform with 45° chamfered front corners and front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm with folding lid
* 400 mm high aluminum drop sides (RAL 9010 pure white) foldable and detachable on the saddle platform sides
* Rear wall -150 mm- inserted
* Rear slope on the saddle platform to the low-bed approx. 700 mm long
* Saddle platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks
* Tread plate over the axles

----Extensions:

* 8 mechanical folding extensions to 3 m overall width (but not on the rear slope) (extension boards available with storage on the saddle platform)
* Mechanically adjustable warning panel packages front and rear

----Load securing (lashing package):

* On the saddle platform: 2 x 6.3 t lashings each, and 3 x 5 t lashing bars on each side in the outer frame
* On the low-bed platform: 2 x 13.4 t lashing rings on each side and 4 x 10 t lashing rings, pivotable and lowerable, recessed into the outer frame
* 2 x 6.4 t lashing eyes each side, plus 1 lashing ring at the rear in the excavator arm tray
* 2 x container locks immediately after the step in the low-bed platform

----Excavator arm tray:

* Continuous excavator arm tray from the end of the last fixed axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm

----Ramps:

* Mechanically operated, one-piece, hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically width-adjustable)
* 4-way valve block for future customer retrofitting of hydraulic ramp shift
* The outer plank of the loading ramp is made of 50 mm hardwood
* Climbing strips on the outer frame of the ramp and on the approach slope
* Rubber on the ramp and approach slope

----Hydraulics:

* Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from over 40 liters up to 120 l/min)

----Loading dimensions:

* Load area on saddle platform: approx. 3,935 x 2,480 mm
* Low-bed load area: approx. 8,500 x 2,520 mm
* Loading height unladen approx. 910 mm (incl. 860 mm approach slope)

----Coupling height:

* Approx. 1,220 mm (suitable for 2- and 3-axle tractors)

----Paintwork:

* Chassis, ramps, rear folding supports, extension brackets hot-dip galvanized
* Axles, landing gear, air tanks painted black
* Vehicle is hot-dip galvanized

----Information:

* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Sample images may show equipment not included with the offered vehicle
* Sample images

----Delivery time:

* tba

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.