Matala lavettipuoliperävaunu

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Hebebett

You can find our complete range of vehicles, including immediately available and short-term delivery vehicles, on our website.

Sample of the equipment. Full equipment details available on request.

Neck (Gooseneck):
* Gooseneck with front corners bevelled approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick

Loading Platform:
* Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8°
* 6 pairs of external foldable lashing rings (LC 5,000 daN)
* 2 pairs of external foldable lashing rings (LC 10,000 daN)
Dkodpeyhkrrsfx Aifjl
* 1 pair of internal foldable lashing rings at the central beam front (LC 10,000 daN)
* Cut-outs in the outer frame of the platform for hooking in tensioning straps (LC 2,000 daN)
* Grating flooring C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), treadplate flooring over the axles

Two-piece Steel Ramps:
* One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm)
* Ramp with hydraulically folding ramp sections
* Hydraulic lift unit, hydraulically adjustable
* Maximum load per pair: approx. 40,000 kg

Landing Legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load)

Axles:
* BPW axles and suspension, 2 fixed axles, 1 self-steering axle
* Technical axle load: 12,000 kg each
* Electromagnetic reversing lock automatic via reverse gear and manual activation
* Air suspension with lift and lower valve

Braking System:
* WABCO braking system in compliance with EU regulations with EBS-E (2S2M)

Tyres:
Tyres 235/75 R 17.5 3PMSF – make at our discretion

TPMS:
* TPMS tyre pressure monitoring system according to ECE R 141

Paintwork:
* HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection
* Final coating with 2 layers of 2K topcoat, single-coloured in RAL 3002 Carmine Red as per RAL System 841GL
* Rims in silver grey

Accessories included:
* 2-inch king pin
* Galvanized steel front wall approx. 400 mm high
* Grating in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm)
* Grating in the platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm)
* Electric-hydraulic unit at the rear under the platform
* Plug-in aluminium side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H). Rear galvanized insert stanchions removable. (Body length approx. 2,560 mm)
* Electric winch with radio remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide roller
* Bolted approx. 5 t ring for winch cable loop on the neck without deflection pulley
* One galvanized toolbox integrated in the sloped gooseneck with opening for a winch
* Grating on the gooseneck C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm)
* 7 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform
* Lift axle on the front axle, controlled by TEBS E depending on actual axle load and current loading status
* 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.