Matala lavettipuoliperävaunu

FAYMONVILLE MAX TRAILER MAX100 4A 8.60 U

Low loader semitrailer MAX100 4 A 8.60 U

Technical data
Hedpfeg Sk T Djx Abmefn
Speed 80 km/h
Total weight 60,800 kg
Fifth wheel load 18,000 kg
Axle load 42,800 kg
Empty weight
Payload
Gooseneck length 3,850 mm
Fifth wheel height loaded 1,250 mm
Loading area length 8,600 mm
Extendable by 5,400 mm
Axle spacing 1,360 mm
Rear steering radius 2,300 mm
Loading height with max. load 860 mm
Total width 2,540 mm
Suspension travel -55/+145 mm

Technical description
Gooseneck
With bevelled corners at the front 45° and with rear bevel of approx. 760 mm x 10°
3 pairs of lashing rings (LC 5,000 daN)
Hardwood flooring 30 mm thick
Loading area in extendable version
with rear slope of approx. 1,000 mm x 8°
5 pairs of lashing rings that can be folded outwards (LC 5,000 daN)
3 pairs of lashing rings that can be folded outwards (LC 10,000 daN)
1 pair of lashing rings lying in the front of the loading area (LC 10,000)
Hardwood flooring approx. 48 mm thick, checkered plate above the axles
Ramps
Two-part steel ramps
A pair of galvanized two-part steel ramps approx. 2750 +1400 mm x 800 mm with approx. 48 mm thick hardwood flooring
Ramp with hydraulically foldable and retractable ramp parts, hydraulic lifting mechanism and hydraulically movable.
Maximum load per pair 40,000 kg
Tires
235/75 R 17.5
Brake system in accordance with EU regulations with EBS-E (4S3M)
without connecting lines to the tractor unit
Paintwork
First-class, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc dust primer
a high-quality 2-component (2K) top coat in a single color in RAL colors of your choice
Rear section metallized and painted in RAL 9010 (pure white).
Seat supports:
JOST seat supports (mechanical) with 2-speed gearbox for 24t
lifting load (50t test load)
Steel construction made of high-strength fine grain steels.
Steel qualities:
Steel construction made of high-strength fine-grain steel
S355J2+N/S355MC (yield strength 355MPa)
S690QL/S700MC (yield strength 690MPa)
Electrical system in accordance with EU regulations, lighting LED 24
Volt ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX on the connection panel at the front with sockets 24N, 24S & 15-pin.
Connection in accordance with ISO.
24N IS0-1185
24S IS0-3731
15-pin IS0-12098
Accessories included:
A galvanized steel front wall approx. 400 mm high.
2" kingpin
4 pieces of brake shoes with holder on the bulkhead.
A holder for a rotating beacon at the rear of the trailer.
SAF axles, two axles rigid, one axle with self-steering, air-sprung, with drum brake, with lifting/lowering function.
The self-steering axle with electro-magnetic reversing lock can be activated via reverse gear or manually.
Axle tool.
Holder in the rear area of the gooseneck for aluminum loading ramps.
Galvanized folding supports under the slope of the loading area.
Mechanical locking of the loading area.
A spare wheel with holder in front of the bulkhead.
Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear
of the trailer.
Yellow-red air couplings on the galvanized connection strip at the front.
On the gooseneck and on the rear panel on the left and right there is a holder for the warning signs including a socket.
A mud flap at the rear of the trailer.
Manual and description
On the gooseneck, plug-in aluminum side walls and rear wall approx. 2,440 x 400 mm (LX H).
The rear galvanized plug-in stanchions are removable.
Length of the body approx. 2,560 mm, +/- 46 kg
3 pairs of WADER container

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.