Kolmisuuntainen kippiperävaunuMÜLLER-MITTELTAL
3 Seitenkip.- Strongw., 10 to Ram, Sonderpreis
Kolmisuuntainen kippiperävaunu
MÜLLER-MITTELTAL
3 Seitenkip.- Strongw., 10 to Ram, Sonderpreis
kiinteä hinta ei sisällä ALV
33 000 €
(39 270 € bruttomassa)
Valmistusvuosi
2026
Kunto
Uusi
Sijainti
Egestorf 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
33 000 €
(39 270 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 10 800 kg
- Kokonaispaino:
- 14 400 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 5 000 mm
- Lastitilan leveys:
- 2 420 mm
- Kuormatilan korkeus:
- 600 mm
Tarjouksen tiedot
- Listaustunnus:
- A207-53-287
- Viitenumero:
- 6157
- Päivitetty viimeksi:
- 13.12.2025
Kuvaus
* KA-TA-R 14.4:
* Wabco EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Tire pressure monitoring with display option in the truck via EBS signal – without requiring truck-side installation
* Drum brakes
* 2 x 7-ton Gigant axles
* Parabolic springs with tandem equalizer assembly
* Drawbar adjustable in height by approx. 300 mm with 40 mm flange towing eye
* Jost mechanical landing gear at the front
* 2 mechanical folding support legs at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on the chassis
Godpfxsx Hm Ris Agmjca
* 15-pin electrical connector
* LED rear lights, 12/24 V
* Bolt-on underrun protection
* Plastic quarter mudguards
* Lashing hooks integrated into the central locking mounts as well as 2 on the front wall
* Chassis made of high-tensile fine-grained steel
* Steel pallet, 3-way tipper body with reinforced Strong side walls (continuous upper side walls with internal tube reinforcement – without center stanchions – foldable with wall spring assist)
* Bolt-on rear stanchions
* Combined steel double-wing rear doors – asymmetrically split, swiveling and lockable up to 270°, not foldable – with additional swing frame for automatic tailgate opening during tipping; locking via galvanized rotary bar lock at the rear and central locking; deactivation function for automatic tailgate during rearward tipping with open doors
* Lashing rings: 1 x 5 tons lashing point in each corner; 4 x 3 tons lashing rings recessed in the outer frame on each side
* 4 mm floor plate made of high-tensile steel
* Rear mounting rail for loading ramps
* Reinforced body with load securing certificate
* 1 pair of aluminum loading ramps, approx. 3,570 x 410 mm (capacity 10 tons/pair), suitable for rubber-tired & tracked vehicles
* Lockable storage compartment recessed below the load floor in the chassis at the rear for ramps
* Drawbar, underrun guard, rear stake, rear folding supports hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black
* Tires: 358/55 R 19.5
* Side wall coating in RAL 9010 pure white
* Side wall painting in RAL color of your choice available for a surcharge
* Subject to errors and prior sale
* Available immediately from calendar week 10/2026
* Sample images
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
* Wabco EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Tire pressure monitoring with display option in the truck via EBS signal – without requiring truck-side installation
* Drum brakes
* 2 x 7-ton Gigant axles
* Parabolic springs with tandem equalizer assembly
* Drawbar adjustable in height by approx. 300 mm with 40 mm flange towing eye
* Jost mechanical landing gear at the front
* 2 mechanical folding support legs at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on the chassis
Godpfxsx Hm Ris Agmjca
* 15-pin electrical connector
* LED rear lights, 12/24 V
* Bolt-on underrun protection
* Plastic quarter mudguards
* Lashing hooks integrated into the central locking mounts as well as 2 on the front wall
* Chassis made of high-tensile fine-grained steel
* Steel pallet, 3-way tipper body with reinforced Strong side walls (continuous upper side walls with internal tube reinforcement – without center stanchions – foldable with wall spring assist)
* Bolt-on rear stanchions
* Combined steel double-wing rear doors – asymmetrically split, swiveling and lockable up to 270°, not foldable – with additional swing frame for automatic tailgate opening during tipping; locking via galvanized rotary bar lock at the rear and central locking; deactivation function for automatic tailgate during rearward tipping with open doors
* Lashing rings: 1 x 5 tons lashing point in each corner; 4 x 3 tons lashing rings recessed in the outer frame on each side
* 4 mm floor plate made of high-tensile steel
* Rear mounting rail for loading ramps
* Reinforced body with load securing certificate
* 1 pair of aluminum loading ramps, approx. 3,570 x 410 mm (capacity 10 tons/pair), suitable for rubber-tired & tracked vehicles
* Lockable storage compartment recessed below the load floor in the chassis at the rear for ramps
* Drawbar, underrun guard, rear stake, rear folding supports hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black
* Tires: 358/55 R 19.5
* Side wall coating in RAL 9010 pure white
* Side wall painting in RAL color of your choice available for a surcharge
* Subject to errors and prior sale
* Available immediately from calendar week 10/2026
* Sample images
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Lähetä pyyntö
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe
































































