Matala lavetti perävaunuMÜLLER-MITTELTAL
3 Seitenkip.- Strongw., 10 to Ram, Sonderpreis
Matala lavetti perävaunu
MÜLLER-MITTELTAL
3 Seitenkip.- Strongw., 10 to Ram, Sonderpreis
kiinteä hinta ei sisällä ALV
33 000 €
(39 270 € bruttomassa)
Valmistusvuosi
2026
Kunto
Uusi
Sijainti
Egestorf 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
33 000 €
(39 270 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 10 800 kg
- Kokonaispaino:
- 14 400 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 5 000 mm
- Lastitilan leveys:
- 2 420 mm
- Kuormatilan korkeus:
- 600 mm
Tarjouksen tiedot
- Listaustunnus:
- A207-53-282
- Viitenumero:
- 61571
- Päivitetty viimeksi:
- 13.12.2025
Kuvaus
* KA-TA-R 14.4:
* Wabco EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Tire pressure monitoring with display possibility in the truck via EBS signal – no vehicle-side installation required
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with tandem equalizing unit
* Height-adjustable drawbar, adjustable by 300 mm with 40 mm flange towing eye
* Jost mechanical support leg at the front
* Two mechanical folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right front side of the chassis
* 15-pin electrical connector
Gcedpfx Agox Hm Rcemea
* LED tail lights 12/24 V
* Bolt-on rear underrun protection
* Plastic quarter mudguards
* Lashing hooks at the central locking mounts and two units at the front wall
* Chassis made of fine-grain steel
* Steel pallet body, 3-way tipper with reinforced Strong side boards (continuous upper side walls with internal tube reinforcement – no center stanchions – foldable with board spring assist)
* Rear stanchions bolted
* Combination steel double wing doors, asymmetrically split at the rear, can swing and be locked at 270° – non-foldable – plus an additional swing frame for automatic rear tailgate opening during tipping, rear lock by galvanized rotary bar lock and central locking, deactivation function for auto tailgate during reverse tipping with an open wing door
* In each corner 1 x 5 t lashing point, and in each side 4 x 3 t lashing rings recessed in the outer frame
* 4 mm floor plate made of fine-grain steel
* Rear mounting rail for loading ramps
* Reinforced body with load securing certificate
* 1 pair of aluminum ramps approx. 3570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles
* Rear lockable storage box recessed under the loading area in the chassis for the ramps
* Drawbar, underrun protection, rear stanchion, and rear folding supports hot-dip galvanized
* Axles, springs, air tank, and support leg painted black
* Tires: 358/55 R 19.5
* Side boards painted in RAL 9010 pure white
* Painting of side walls in any RAL color available at extra charge
* Subject to errors and prior sale
* Available immediately from week 10/2026
* Sample images
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
* Wabco EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Tire pressure monitoring with display possibility in the truck via EBS signal – no vehicle-side installation required
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with tandem equalizing unit
* Height-adjustable drawbar, adjustable by 300 mm with 40 mm flange towing eye
* Jost mechanical support leg at the front
* Two mechanical folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right front side of the chassis
* 15-pin electrical connector
Gcedpfx Agox Hm Rcemea
* LED tail lights 12/24 V
* Bolt-on rear underrun protection
* Plastic quarter mudguards
* Lashing hooks at the central locking mounts and two units at the front wall
* Chassis made of fine-grain steel
* Steel pallet body, 3-way tipper with reinforced Strong side boards (continuous upper side walls with internal tube reinforcement – no center stanchions – foldable with board spring assist)
* Rear stanchions bolted
* Combination steel double wing doors, asymmetrically split at the rear, can swing and be locked at 270° – non-foldable – plus an additional swing frame for automatic rear tailgate opening during tipping, rear lock by galvanized rotary bar lock and central locking, deactivation function for auto tailgate during reverse tipping with an open wing door
* In each corner 1 x 5 t lashing point, and in each side 4 x 3 t lashing rings recessed in the outer frame
* 4 mm floor plate made of fine-grain steel
* Rear mounting rail for loading ramps
* Reinforced body with load securing certificate
* 1 pair of aluminum ramps approx. 3570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles
* Rear lockable storage box recessed under the loading area in the chassis for the ramps
* Drawbar, underrun protection, rear stanchion, and rear folding supports hot-dip galvanized
* Axles, springs, air tank, and support leg painted black
* Tires: 358/55 R 19.5
* Side boards painted in RAL 9010 pure white
* Painting of side walls in any RAL color available at extra charge
* Subject to errors and prior sale
* Available immediately from week 10/2026
* Sample images
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Lähetä pyyntö
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe
































































