TalvikunnossapitokalustoOther
Salzstreuer, Streumaschine Winterdienst Küpper Weisser für UNIMOG (3658)
Talvikunnossapitokalusto
Other
Salzstreuer, Streumaschine Winterdienst Küpper Weisser für UNIMOG (3658)
Kiinteä hinta alv 0% (veroton)
5 800 €
(6 902 € bruttomassa)
Kunto
Käytetty
Sijainti
Oberhausen 

Perustiedot
Hinta ja sijainti
Kiinteä hinta alv 0% (veroton)
5 800 €
(6 902 € bruttomassa)
- Sijainti:
- Weierstr. 95, 46149 Oberhausen, Deutschland

Soita
Tekniset tiedot
- Väri:
- oranssi
- Omamassa:
- 430 kg
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A792-95-93
- Viitenumero:
- 20574528
- Päivitys:
- viimeksi 29.11.2024
Kuvaus
We are offering a salt spreader from Küpper Weisser (internal number 3658).
Type: IMSSE J18018H
Serial number: 130266
Year of manufacture: 2013
Unladen weight: 430 kg
Hjdpfx Aljiv U D Hjcofi
The salt container has a capacity of approximately 1.8 m³. The spreading width and spreading rate can be easily adjusted during operation via the control panel. The spreader was mounted on a UNIMOG and used by us. However, before the winter service season, it was carefully treated with an anti-corrosion agent in our workshop, resulting in minimal corrosion. It has only a minor defect: the mounting of the spreading disc is broken and needs to be welded. This can be done at our workshop when you pick it up. Otherwise, the machine is in good condition and can be put into service immediately.
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Type: IMSSE J18018H
Serial number: 130266
Year of manufacture: 2013
Unladen weight: 430 kg
Hjdpfx Aljiv U D Hjcofi
The salt container has a capacity of approximately 1.8 m³. The spreading width and spreading rate can be easily adjusted during operation via the control panel. The spreader was mounted on a UNIMOG and used by us. However, before the winter service season, it was carefully treated with an anti-corrosion agent in our workshop, resulting in minimal corrosion. It has only a minor defect: the mounting of the spreading disc is broken and needs to be welded. This can be done at our workshop when you pick it up. Otherwise, the machine is in good condition and can be put into service immediately.
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2003
6 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 208 4... ilmoitukset
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe














