TrukkiPALFINGER
F3-253 GTS 4W *Schere*HH3100mm
Trukki
PALFINGER
F3-253 GTS 4W *Schere*HH3100mm
Kiinteä hinta alv 0% (veroton)
3 900 €
(4 641 € bruttomassa)
Valmistusvuosi
2015
Kunto
Käytetty
Sijainti
Steinfeld 

Hinta ja sijainti
Kiinteä hinta alv 0% (veroton)
3 900 €
(4 641 € bruttomassa)
- Myyjän sijainti:
- Rienshof 2, 49439 Steinfeld, Saksa

Soita
Tekniset tiedot
- Kantavuus:
- 2 500 kg
- Nostokorkeus:
- 3 100 mm
- Polttoainetyyppi:
- diesel
- Rakennuskorkeus:
- 2 750 mm
- Varusteet:
- pääharja
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A227-25-512
- Viitenumero:
- 14384 / 100283169
- Päivitys:
- viimeksi 10.09.2026
Kuvaus
Offered for sale is a Palfinger F3-253 GTS truck-mounted forklift with the following equipment:
* (3-wheel drive) - 2,500 kg load capacity at LSP 1,450 mm (the load capacity of attachments must be considered)
* - 1,200 mm overhang on the truck
* - Mast tilt plus/minus 6°
* - Fork carriage FEM 3B, 1,200 mm wide
Godjzzu Rkjpfx Ag Heug
* - Hydrostatic drive on 3 wheels with differential lock and dynamic torque control
* - Hydraulically switchable 4-way system
* - Static disc brake, hydraulically released
* - Mechanical battery disconnect switch
* - Speed limited to 6 km/h (therefore, no registration required)
* - Flashing lights for transport, 24 volts
* - LED warning light
* - Hydraulic front supports
* - Hour meter
* - Fuel gauge
* - 2 work lights at the front
* - 1 work light at the rear
* - 1 retractable rain cover
* - Rear lights and turn signals, 12V, when operating as a forklift
* - Chain holder in pintle hook design
* - CE version with declaration of conformity and inspection certificate
* Steel forks 1800 x 125 x 45
* 3,100 mm duplex mast with scissor lift (pantograph),
* Side shift 125 mm / 125 mm,
* Lombardini diesel engine, water-cooled,
* Electrical system in 12 volts
* Tab for chain holder
* Floor control at the rear, functions: lifting and lowering / tilting forward and backward
* Driver's seat, sprung and foldable,
* LED work lights
Upon request, customs license plates and insurance can be provided at an additional cost! For export business, we can carry out the export declaration and approval for you against reimbursement of costs. When exporting to third countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery.
For further information, please contact Mr. Lübberding on mobile/WhatsApp or Mr. Rohe! Always make an appointment for inspection/test drive! Just take a look at us. We are looking forward to your visit.
----Disclaimer: The information provided on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors / changes / input errors / mistakes. Subject to prior sale!
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
* (3-wheel drive) - 2,500 kg load capacity at LSP 1,450 mm (the load capacity of attachments must be considered)
* - 1,200 mm overhang on the truck
* - Mast tilt plus/minus 6°
* - Fork carriage FEM 3B, 1,200 mm wide
Godjzzu Rkjpfx Ag Heug
* - Hydrostatic drive on 3 wheels with differential lock and dynamic torque control
* - Hydraulically switchable 4-way system
* - Static disc brake, hydraulically released
* - Mechanical battery disconnect switch
* - Speed limited to 6 km/h (therefore, no registration required)
* - Flashing lights for transport, 24 volts
* - LED warning light
* - Hydraulic front supports
* - Hour meter
* - Fuel gauge
* - 2 work lights at the front
* - 1 work light at the rear
* - 1 retractable rain cover
* - Rear lights and turn signals, 12V, when operating as a forklift
* - Chain holder in pintle hook design
* - CE version with declaration of conformity and inspection certificate
* Steel forks 1800 x 125 x 45
* 3,100 mm duplex mast with scissor lift (pantograph),
* Side shift 125 mm / 125 mm,
* Lombardini diesel engine, water-cooled,
* Electrical system in 12 volts
* Tab for chain holder
* Floor control at the rear, functions: lifting and lowering / tilting forward and backward
* Driver's seat, sprung and foldable,
* LED work lights
Upon request, customs license plates and insurance can be provided at an additional cost! For export business, we can carry out the export declaration and approval for you against reimbursement of costs. When exporting to third countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery.
For further information, please contact Mr. Lübberding on mobile/WhatsApp or Mr. Rohe! Always make an appointment for inspection/test drive! Just take a look at us. We are looking forward to your visit.
----Disclaimer: The information provided on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors / changes / input errors / mistakes. Subject to prior sale!
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2009
45 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 5492 ... ilmoitukset
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe


































