Kippipuoliperävaunu

STAS ferroSTAR 54,9 cbm

ferroSTAR 54.9 cbm
iron gray
Chassis type: Z-chassis
Axle distance (mm): 1310-1310
Fifth wheel height (mm): 1150
Chassis width (mm): 1400
Loading width (mm): 2325
Technically permissible total weight: 39 = 12 + 9 + 9 + 9
Interior height front (mm) (IHF): 2285
Interior height rear (mm) (IHB): 2285
Volume (m³): 54.9
Overall width (mm): 2550
Wheelbase (mm) (WB): 6600
Overall length (mm): 11520.836

Chassis material: Steel
Tire dimension: 385/65R22.5
Loading length (mm): 10149
Axle manufacturer: SAF
Axle version: Intra
Brake version: Disc brake
Brake type: SAF - SBS 2220
Cedpfx Ajzmcn Uolcshb
Offset (ET): 120
Option 1: Axle with lift axle and starting aid
Activation of starting aid: via button in the truck (installation of the button is not included in the scope of supply) and by pressing the brake pedal three times
Air suspension: ECAS with lifting and lowering valve
Lowering of air suspension: Automatic lowering of the air suspension during tilting, can be manually locked via the Smartboard, as well as a switch on the chassis
Coupling head: Pneumatic, European Palm coupling
Tire brand: Manufacturer's choice
Rims: Steel
Tire type: Regional
Wheel nuts: Open
Wheel nut caps: Plastic
Outrigger supports: Aluminum drop-leg supports, mounted at the front of the chassis, with individual operation on both sides, supporting force 20t / pair
Operation of underride protection: Manual
Position of Smartboard: On the left side, in the direction of travel, in front of the axles
Toolbox: On the left side, in the direction of travel, in front of the axles
Spare wheel holder: On the right side, in the direction of travel, below the chassis
Number of splash guards on the fender: 2 pieces
Type of splash guard on the fender: Clear Pass
Manufacturer of lighting: Aspöck
Type of lighting: ECOLED II
Work lights (operated via switch): Included
Position of work lights (operated via switch):
2 LED reversing lights at the rear, on the left and right in the direction of travel, mounted on the lamp carrier
Position of work lights (operated via switch):
2 LED reversing lights at the front, on the left and right in the direction of travel, mounted in the area of the outrigger supports
Manufacturer of tilting cylinder: Hyva (STAS manufacturer's choice)
Type of tilting cylinder: Hydraulic cylinder with small housing
Cylinder tilting angle: Normal
Model of tilting cylinder: Hyva - FC 169
Stroke of tilting cylinder: 7130
Hydraulic coupling: Swivel coupling
Hydraulic coupling - Size: 1
Hydraulic coupling - Gender: Female
Hydraulic coupling - Hose: 2,100 mm
Type of Smartboard: ECAS control box
Aluminum ladder: With 2.8 m length, mounted on the right in the direction of travel
Broom and shovel holder: Included
Position of broom and shovel holder: With 3 holders each, mounted on the chassis on the left in the direction of travel
Position of broom and shovel holder: On the front wall, on the left in the direction of travel
Load manometer: Ø 63 mm - mounted on the side of the instrument panel
Splash guard for underride protection: Black with STAS logo, mounted across the entire width of the underride protection
Mounting of splash guard for underride protection: Flexible
Plastic support wedges: With two plastic support wedges including holder
Air and electrical console: Mounted on the right in the direction of travel

Rear wall type: Swing doors
A-sign: Foldable on the rear wall, mounted on the right in the direction of travel
Floor: Made of 6 mm HB450
Position of rubber supports: Mounted below the floor

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.