Metsäkone

Pfanzelt MORITZ FR 75

MORITZ FR 75
(0010) VS.PS_RH-10575/6-II Pfanzelt tracked vehicle Moritz FR 75
(0020) - Tracked vehicle with rubber track system,
(0030) track width 300 mm
(0040) - Overall width approx. 1200 - 1600 mm
(0050) Adjustable track width via radio remote control
Pgedpfx Akjzkwz Doqor
(0060) - Overall length with mounted winch and
(0070) dozer blade approx. 2300 mm
(0080) - Ground clearance: approx. 320 mm
(0090) - Height of upper edge of frame approx. 1350 mm
(0100) - Slope angle approx. 50° at the front and
degrees at the rear
(0120) Engine:
(0130) - Deutz diesel engine TD2.9L4
(0140) - 4 cylinders, water-cooled, turbocharger
(0150) - Power 55 kW / 75 hp
(0160) - EU emission stage V
(0170) - Fuel capacity: approx. 45 l
(0180) - Hydraulic oil: approx. 30 l
(0190) - Cleanfix reversing fan
(0200) - Combined cooler water / hydraulic oil
(0210) Travel hydraulics
(0220) - Closed 2-circuit system
(0230) proportional (2 x 11 kW),
(0240) - All travel functions controlled via radio
(0250) remote control
(0260) - Pre-stage oil fine filter
(0270) - Travel speed continuously variable from 1st
(0280) gear 0-3 km/h and 2nd gear approx. 0-6 km/h
(0290) - Maximum speed continuously adjustable
(0300)
(0310) - Drift adjustment to compensate for the
(0320) side force when mowing across the
(0330) slope
(0340) - Automatically hydraulically tensioned
(0350) double idler wheel
(0360) On-board hydraulics:
(0370) - Separate oil circuit, pump with approx.
l/min at 200 bar
(0390) - Standard scope includes a proportional
(0400) control unit (for lifting device) with
(0410) floating position
(0420) - A total of 4 optional proportional double-acting
(0430) valves and 2 on/off double-acting
(0440) valves
(0450) Chassis:
(0460) - Torsionally rigid box profile made of
(0470) special steel
(0480) - Large lockable storage compartment
(0490) integrated on the side of the chassis and a
(0500) storage compartment on top (open)
(0510) - Attachment points for securing the track
(0520) - Large engine hood for maintenance work
(0530) - Continuous underbody protection made of
(0540) full steel
(0550) - All-round branch guard with
(0560) integrated hood protection
(0570) - Standard rear lifting device with max.
(0580) lifting force at the coupling point: 11 kN
(0590) Operation of the entire machine:
(0600) - Radio remote control for all functions
(0610) - Emergency stop
(0620) - Throttle control of the diesel engine
(0630) - Fan reversal
(0640) - Driving and steering
(0650) - 1st and 2nd gear
(0660) - Drift adjustment
(0670) - Winch control
(0680) - Dozer blade up/down
(0690) - Floating position of the lifting device
(0700) - Width adjustment of the undercarriage
(0710) - Direction of travel reversal
(0720) - PTO shaft on/off
(0730) - Additional control valves
(0740) - Winch operation / external consumer
(0750) - Signal horn
(0760) ALL RADIO COMMANDS ON ONE OPERATING LEVEL
(0770) VS.LAUFWERK300 Undercarriage 300 mm wide
(0780) VS.ZAPFWELLENGETRIEB PTO drive for tracked vehicle 50/75
(0790) - Maintenance-free, oil-bath lubricated and
(0800) oil-cooled multi-plate clutch
(0810) - PTO speed at the gearbox approx.
5 rpm at 2,100 rpm
(0820) - Direction of rotation when looking at the stub
(0830) in the PTO
(0840) LEISTUNGSHYDRAULIKRA High-performance hydraulics for tracked vehicle 50/75
(0850) VS.AUSHUBWINDERAUPE5 Excavation device, winch, felling aid Moritz
(0860) VS.KETTENVORHANG Chain curtain
(0870) VS.PROPDWRAUP50/75_L Proportional double-acting valve 2/1 (1/1 s

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.