Lietetekniikka

Joskin VOLUMETRA 18000 D

VOLUMETRA 18000 D
Joskin slurry tanker
With vacuum pump
Forced steering axle – incl. towing eye,
Central adjustment unit with 2 nitrogen spheres,
Hand pump with oil tank and pressure gauge replacing
the trailing axle
Axle spacing of 1,820 mm instead of 1,550 mm
with hydro tandem or hydro tridem
(PROHIBITED with rigid axles) – REQUIRED
for wheels with diameter Ø 1,601 to 1,675 mm
Load-dependent air brakes for
vehicle equipped with hydraulic axle suspension (air brakes required)
2 LED rear work lights (with control unit in the cab)
Position and side marker LED lights
Rear underrun protection
Pump type PNR 155 JUROP (15,200 l/min at atmospheric pressure – 13,217 l/min at 60% vacuum) –
direct PTO connection at 1,000 rpm – automatic lubrication,
Gusdpoxntdisfx Abmeh
60 l siphon separator, rubber hose Ø 100 mm, JOSKIN overpressure valve Ø 150 mm,
and air injection cooling
replaces MEC 8000
ECOPUMP: silencer with high-volume
oil separator and increased air intake –
noise reduction included
Single wide-angle PTO shaft (Walterscheid)
Level indicator Ø 6" (150 mm, plexiglass sight tube) instead
of standard sight glass
Suction slide valve Ø 6" (150 mm) with
guide rail, Perrot type
Turbofiller Ø 8" (200 mm) for high capacity
(hydraulics: 50 l/min at 180 bar) with pressure gauge Ø 60 mm
(suction slide valve required)
Prepared for FrontJUMBO without installation, Ø 200 mm,
or for lateral JUMBO suction arm
Ball head Ø 50 mm for coupling rod
of the steering axle
Electrohydraulic control with
low flow rate – all functions except
hydraulic motor (distributor head, turbo, and chopper) (input block required)
– per function
Flow diversion for turbo, agitator,
or tire pressure control system (high capacity with PVG) – (low-volume functions
not available when using this feature) (NOTE: may only be ordered once)
TÜV approval for 40 km/h (without rear underrun protection)
Tyres 750/60R30.5 FL 630 SUPER (BKT) 181 D (Ø 1,675 x 754 mm, 11,220 kg per tyre
at 40 km/h and 4 bar) instead of 400R22.5
Mini wheel arch kit (available only on VOLUMETRA and EUROLINER)
SOLODISC pre-equipment for COBRA2,
TETRAX, QUADRA, EUROLINER, and VOLUMETRA – including AUTOMATE kit 2+3
instead of rear slide valve and standard
distributor
AUTOMATE 2+4 instead of AUTOMATE 2+3
(required on SOLODISC with
hydraulic leveling system)

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.