Lietetekniikka

Wienhoff 21.000 T PTW PROFI LINE

21,000 T PTW PROFI LINE
(0010) Wienhoff slurry tanker 21000 T PTW PrL
(0020) Slurry tanker type 20,800 _TW Profi Line, coated. FV
(0021)
(0022) Please direct all inquiries exclusively to
(0023) the following contact details!!
(0024) Jan Lohoff Tel.
(0025) The staff members listed here from
(0026) AGRAVIS Technik Center
(0027) are automatically listed and
(0028) cannot provide any information
(0029)
(0030) Slurry tanker with internal coating and external painting.
(0040) 7.10 m cylinder,
(0050) 6 mm wall thickness, 1.90 m tank diameter, 3 welded
(0060) baffle plates
(0070) in the tank and a manhole cover parallel to the rear cover.
(0080) Tank with liquid displacement system for
(0090) drawbar load optimization.
(0100) Tank in classic Fendt green, 32" wheels with red outer surfaces,
(0110) axles, drawbar and small parts in black.
(0120) Safety valve
(0130) Simple tank ventilation and venting (through the tank)
(0140) (Important: fitted with hose routed downward)
(0150) Second tank ventilation and venting at the rear for FV (only with
(0160) CAN-Bus)
(0170) (Important: fitted with hose routed downward)
(0180) Fill level indicator with float, diameter 220 mm at the front
(0190) in the tank for CAN-Bus
(0200) 8" suction connection with 8" manual slide valve and quick coupling
(0210) (front left for suction)
(0220) 6" suction connection with 6" manual slide valve and quick coupling
(0230) (front right for suction and rear
(0240) left directly in the tank for extraction)
(0250) 8" hydraulic slide valve
(0260) (between the suction valves and
(0270) the stone trap box, this valve
(0280) is linked to the automatic changeover system)
(0290) 14 t Gigant air suspension, forced steering via cables, tandem
(0300) with 140 FAD axles, track width 2225 mm, RDR prepared.
(0310) Low center of gravity: axles positioned above the springs (one
(0320) wheel arch per axle)
(0330) Wheels: 30.5 LR 32 BKT Roadmax FL 690
(0340) Wheels: 650/65 R 30.5 Vredestein Flotation Trac
(0350) maize tires, with connection for RDA
(0360) (mount these wheels before delivery)
(0370) Hydro-pneumatic suspended lower linkage 1900, K80 with
(0380) hydraulic support leg
(0390) Top edge of ball hitch tractor: 700 mm
(0400) Preparation for top cylinder system
(0410) Flat bar on the drawbar
(0420) Dual-circuit air brake with ALB
(0430) 40 km/h equipment with galvanized mudguards:
(0440) galvanized mudguards with round steel edges,
(0450) warning boards + marker lights
(0460) underride protection with truck lighting
(0470) 40 km/h TÜV certificate
(0480) Extra charge for LED lighting on underride protection
(0490) Outline marker lights on underride protection for enhanced
(0500) visibility of vehicle dimensions
(0510) LED
(0520) active marker lights instead of reflectors on
(0530) the vehicle side
Bodpfxewwnd Ej Aaxslp
(0540) LED
(0550) 2 LED work lights, positions:
(0560) left and right on the tank
(0570) 2x as reversing lights on underride protection
(0580) Preparation for camera/beacon
(0590) Bracket at the rear of the tank, steel tube for cable routing
(0610) Vogelsang RotoCut M 10,000 cutting unit
(0620) mounted on large stone trap box.
(0630) Vogelsang rotary lobe pump VX 186/390Q - 9,000 L/min
(0640) Injection system with reduction gearbox
(0650) incl. hydraulic gearshift
(0660) Bondioli Pavesi PTO shaft, size 9 with 10 mm
(0670) shear bolt and wide-angle joint for large pumps
(0680) Overpressure v

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.