Matala lavetti perävaunuMÜLLER-MITTELTAL
14,4 to Tand- Tiefl mit 2- Seitenkipper
Matala lavetti perävaunu
MÜLLER-MITTELTAL
14,4 to Tand- Tiefl mit 2- Seitenkipper
Kiinteä hinta alv 0% (veroton)
34 950 €
(41 590 € bruttomassa)
Valmistusvuosi
2026
Kunto
Uusi
Sijainti
Egestorf 

Perustiedot
Hinta ja sijainti
Kiinteä hinta alv 0% (veroton)
34 950 €
(41 590 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 10 400 kg
- Kokonaispaino:
- 14 400 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 5 500 mm
- Lastitilan leveys:
- 2 420 mm
- Kuormatilan korkeus:
- 500 mm
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A162-17-602
- Viitenumero:
- 62651
- Päivitys:
- viimeksi 23.07.2026
Kuvaus
* ETK-TA-R 14.4:
----Brakes:
* EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7-ton Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
* Height-adjustable drawbar by 300 mm with 40 mm flange coupling
----Electrical system / Lighting:
* Tire pressure monitoring system with display option in the truck via EBS signal without truck-side installation
* 15-pole power socket
* LED tail lights
----General components:
* Mechanical support jacks at the front
* 2 mechanical folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* Bolted underrun protection
* Plastic quarter fenders
----Frame:
* Main frame made of fine-grain steel
----Tipping platform:
* Net hooks on the side and rear in the bearings of the central locking system, as well as 2 pieces on the front wall
* Steel pallet-sided 2-way tipping body, front wall fixed, made of smooth sheet metal, continuous side walls - without center rails, foldable with side board spring lift and pivoting via manual central locking
* Rear rails bolted on
* Steel rear wall inserted in front of the ramps
* 1 x 5-ton lashing point in each corner, as well as 4 x 3-ton lashing eyes on each side embedded in the outer frame
* 4 mm floor made of fine-grain steel
----Ramps:
* Two-part mechanical grid ramps with aluminum tip, 2,150 + 1,300 mm x 600 mm (manually adjustable up to 80 mm)
----Painting:
* Chassis, drawbar, rear rails, underrun protection, mechanical support jacks, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange coupling, and support jacks painted in a black tone
Fedpfxstr Suce Abnjpk
* Side boards and platform painted in RAL 9010 pure white
* Painting of the side walls and tipping platform in a RAL color is possible for an extra charge
----Information:
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery time:
* Available immediately from Egestorf
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
----Brakes:
* EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7-ton Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
* Height-adjustable drawbar by 300 mm with 40 mm flange coupling
----Electrical system / Lighting:
* Tire pressure monitoring system with display option in the truck via EBS signal without truck-side installation
* 15-pole power socket
* LED tail lights
----General components:
* Mechanical support jacks at the front
* 2 mechanical folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* Bolted underrun protection
* Plastic quarter fenders
----Frame:
* Main frame made of fine-grain steel
----Tipping platform:
* Net hooks on the side and rear in the bearings of the central locking system, as well as 2 pieces on the front wall
* Steel pallet-sided 2-way tipping body, front wall fixed, made of smooth sheet metal, continuous side walls - without center rails, foldable with side board spring lift and pivoting via manual central locking
* Rear rails bolted on
* Steel rear wall inserted in front of the ramps
* 1 x 5-ton lashing point in each corner, as well as 4 x 3-ton lashing eyes on each side embedded in the outer frame
* 4 mm floor made of fine-grain steel
----Ramps:
* Two-part mechanical grid ramps with aluminum tip, 2,150 + 1,300 mm x 600 mm (manually adjustable up to 80 mm)
----Painting:
* Chassis, drawbar, rear rails, underrun protection, mechanical support jacks, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange coupling, and support jacks painted in a black tone
Fedpfxstr Suce Abnjpk
* Side boards and platform painted in RAL 9010 pure white
* Painting of the side walls and tipping platform in a RAL color is possible for an extra charge
----Information:
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery time:
* Available immediately from Egestorf
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2001
171 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Pieni ilmoitus
Egestorf
1 343 km
Kolmisuuntainen kippiperävaunu
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
Pieni ilmoitus
Peine
1 413 km
Kippiauto
MANTG-S 26.500 6x2 Absetzkipper Meiller Funk 137TKM
MANTG-S 26.500 6x2 Absetzkipper Meiller Funk 137TKM
Pieni ilmoitus
Gondelsheim
1 781 km
Kippiauto
IVECOStralis AD 190 S / 460 6x2
IVECOStralis AD 190 S / 460 6x2
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe



















































































