Kolmisuuntainen kippiperävaunuMÜLLER-MITTELTAL
14,4 to Tand- Tiefl mit 2- Seitenkipper
Kolmisuuntainen kippiperävaunu
MÜLLER-MITTELTAL
14,4 to Tand- Tiefl mit 2- Seitenkipper
Kiinteä hinta alv 0% (veroton)
34 950 €
(41 590 € bruttomassa)
Valmistusvuosi
2026
Kunto
Uusi
Sijainti
Egestorf 

Perustiedot
Hinta ja sijainti
Kiinteä hinta alv 0% (veroton)
34 950 €
(41 590 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 10 400 kg
- Kokonaispaino:
- 14 400 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 5 500 mm
- Lastitilan leveys:
- 2 420 mm
- Kuormatilan korkeus:
- 500 mm
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A162-17-599
- Viitenumero:
- 6265
- Päivitys:
- viimeksi 23.07.2026
Kuvaus
* ETK-TA-R 14.4:
----Brakes:
* EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 7-ton Gigant axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Drawbar / Flange coupling:
* Drawbar adjustable in height by 300 mm with 40 mm flange coupling
----Electrical system / Lighting:
* Tire pressure monitoring system with display option in the truck via EBS signal, without installation on the truck side
* 15-pole power connector
* LED tail lights
----General components:
* Mechanical support winch at the front
* 2 mechanical folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* Bolted underbody protection
* Plastic quarter fenders
----Frame:
* Main frame made of fine-grain steel
----Tipping body:
* Net hooks on the side and at the rear in the bearings of the central locking system, as well as 2 pieces on the front wall
* Steel pallet-sided, 2-way tipping body, front wall fixed, made of smooth sheet metal, continuous side walls - without center rails, foldable with side board spring lifters, and pivoting via manual central locking
* Rear rails bolted
* Steel rear wall inserted in front of the ramps
* 1 x 5-ton lashing eye in each corner, as well as 4 x 3-ton lashing eyes on each side, embedded in the outer frame
* 4 mm floor made of fine-grain steel
----Ramps:
* Two-part mechanical grating ramps with aluminum tip, 2,150 + 1,300 mm x 600 mm (manually adjustable to 80 mm)
----Painting:
* Chassis, drawbar, rear rails, underbody protection, mechanical fall supports and ramps hot-dip galvanized
* Axles, springs, air tanks, flange coupling and support winch painted in a black shade
* Side boards and tipping body in RAL 9010 pure white
* Painting of the side walls and tipping body in a RAL color is possible for an extra charge
Lrodpfx Aotr St Uep Hjr
----Information:
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery time:
* Available for immediate delivery from Egestorf
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
----Brakes:
* EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 7-ton Gigant axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Drawbar / Flange coupling:
* Drawbar adjustable in height by 300 mm with 40 mm flange coupling
----Electrical system / Lighting:
* Tire pressure monitoring system with display option in the truck via EBS signal, without installation on the truck side
* 15-pole power connector
* LED tail lights
----General components:
* Mechanical support winch at the front
* 2 mechanical folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* Bolted underbody protection
* Plastic quarter fenders
----Frame:
* Main frame made of fine-grain steel
----Tipping body:
* Net hooks on the side and at the rear in the bearings of the central locking system, as well as 2 pieces on the front wall
* Steel pallet-sided, 2-way tipping body, front wall fixed, made of smooth sheet metal, continuous side walls - without center rails, foldable with side board spring lifters, and pivoting via manual central locking
* Rear rails bolted
* Steel rear wall inserted in front of the ramps
* 1 x 5-ton lashing eye in each corner, as well as 4 x 3-ton lashing eyes on each side, embedded in the outer frame
* 4 mm floor made of fine-grain steel
----Ramps:
* Two-part mechanical grating ramps with aluminum tip, 2,150 + 1,300 mm x 600 mm (manually adjustable to 80 mm)
----Painting:
* Chassis, drawbar, rear rails, underbody protection, mechanical fall supports and ramps hot-dip galvanized
* Axles, springs, air tanks, flange coupling and support winch painted in a black shade
* Side boards and tipping body in RAL 9010 pure white
* Painting of the side walls and tipping body in a RAL color is possible for an extra charge
Lrodpfx Aotr St Uep Hjr
----Information:
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery time:
* Available for immediate delivery from Egestorf
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2001
170 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Pieni ilmoitus
Egestorf
1 343 km
Matala lavetti perävaunu
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
Pieni ilmoitus
Gevelsberg
1 618 km
Kolmisuuntainen kippiperävaunu
HUMBAURHTK 754020 Dreiseitenkipper GG:7,5to
HUMBAURHTK 754020 Dreiseitenkipper GG:7,5to
Pieni ilmoitus
Neu-Ulm
1 798 km
Kolmisuuntainen kippiperävaunu
Humbaur3-Seitenkipper HTK 3000.31 Alu, mit Laubgitteraufsatz, 3140 x 1750 x 350 mm, 3,0 to.
Humbaur3-Seitenkipper HTK 3000.31 Alu, mit Laubgitteraufsatz, 3140 x 1750 x 350 mm, 3,0 to.
Pieni ilmoitus
Gondelsheim
1 781 km
Kolmisuuntainen kippiperävaunu
HUMBAURHTK 105024 - Neu - Dreiseitenkipper
HUMBAURHTK 105024 - Neu - Dreiseitenkipper
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe









































































































