Työalustallinen perävaunuMÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Työalustallinen perävaunu
MÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
kiinteä hinta ei sisällä ALV
29 900 €
(35 581 € bruttomassa)
Valmistusvuosi
2025
Kunto
Uusi
Sijainti
Egestorf 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
29 900 €
(35 581 € bruttomassa)
- Sijainti:
- Eichenstich 12, 21272 Egestorf, DE
Soita
Tekniset tiedot
- Kokonaispaino:
- 14 400 kg
- Maksimi kuormauspaino:
- 10 800 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 6 270 mm
- Lastitilan leveys:
- 2 470 mm
Tarjouksen tiedot
- Listaustunnus:
- A152-72-860
- Viitenumero:
- 6247a
- Päivitetty viimeksi:
- 25.06.2025
Kuvaus
* ETÜ-TA-R 14.4:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 tonnes Gigant axles
* Parabolic springs with compensating unit
* Drawbar height adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display option in the truck via EBS signal - no truck-side installation required
* Front landing gear
* External folding supports at the rear
* 15-pin power connector
* 12/24 V LED lighting system
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrical systems
* Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead
* Side impact protection
* Plastic quarter fenders
Gedpfx Aborwc R Rjmouh
* 50 mm softwood floor
* Device for retrofitting control locks in front of the bulkhead
* Bolted 400 mm bulkhead made of smooth sheet metal
* Bolted rear stanchions
* Side walls with Spring jack
* Perforated outer frame, approximately 45 degrees angled, with a 2-ton lashing capacity every 480 mm, installation of 3-ton drop lashing brackets possible every 600 mm, 1 x 6.3-ton lashing ring in each of the front and rear corners, various holes in the front and end beams for 1.2-ton lashing capacity
* One-piece hydraulic grating loading ramps, approximately 2,750 x 600 mm (can be collapsed to within 20 mm)
* Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 liters/min. up to a maximum of 140 liters/min.)
* Chassis, drawbar, front wall, mechanical Hot-dip galvanized drop legs and ramps
* Axles, springs, air chamber, front landing gear, and flanged towing eye painted in a black shade
* Side walls painted in RAL 9010 pure white
* Side walls painted in a RAL color available for an additional charge
* New vehicle with manufacturer's warranty
* Errors and prior sale subject to change
* Available from week 15 of 2025
* Sample images
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 tonnes Gigant axles
* Parabolic springs with compensating unit
* Drawbar height adjustable by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display option in the truck via EBS signal - no truck-side installation required
* Front landing gear
* External folding supports at the rear
* 15-pin power connector
* 12/24 V LED lighting system
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrical systems
* Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead
* Side impact protection
* Plastic quarter fenders
Gedpfx Aborwc R Rjmouh
* 50 mm softwood floor
* Device for retrofitting control locks in front of the bulkhead
* Bolted 400 mm bulkhead made of smooth sheet metal
* Bolted rear stanchions
* Side walls with Spring jack
* Perforated outer frame, approximately 45 degrees angled, with a 2-ton lashing capacity every 480 mm, installation of 3-ton drop lashing brackets possible every 600 mm, 1 x 6.3-ton lashing ring in each of the front and rear corners, various holes in the front and end beams for 1.2-ton lashing capacity
* One-piece hydraulic grating loading ramps, approximately 2,750 x 600 mm (can be collapsed to within 20 mm)
* Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 liters/min. up to a maximum of 140 liters/min.)
* Chassis, drawbar, front wall, mechanical Hot-dip galvanized drop legs and ramps
* Axles, springs, air chamber, front landing gear, and flanged towing eye painted in a black shade
* Side walls painted in RAL 9010 pure white
* Side walls painted in a RAL color available for an additional charge
* New vehicle with manufacturer's warranty
* Errors and prior sale subject to change
* Available from week 15 of 2025
* Sample images
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2001
Lähetä pyyntö
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe