Työalustallinen perävaunuMÜLLER-MITTELTAL
19 to luftgef. Tandemtiefl. mit Einschubrampen
Työalustallinen perävaunu
MÜLLER-MITTELTAL
19 to luftgef. Tandemtiefl. mit Einschubrampen
kiinteä hinta ei sisällä ALV
35 900 €
(42 721 € bruttomassa)
Valmistusvuosi
2025
Kunto
Uusi
Sijainti
Egestorf 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
35 900 €
(42 721 € bruttomassa)
- Sijainti:
- Eichenstich 12, 21272 Egestorf, Deutschland

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 14 400 kg
- Kokonaispaino:
- 19 000 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 6 270 mm
- Lastitilan leveys:
- 2 470 mm
- Kuormatilan korkeus:
- 400 mm
Tarjouksen tiedot
- Listaustunnus:
- A107-46-176
- Viitenumero:
- 61601
- Päivitetty viimeksi:
- 08.01.2026
Kuvaus
* ETÜ-TA-ER 19.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tire monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lifting and lowering device
* Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm using offset plate
* Jost front landing gear
* Outward folding rear supports
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
Cpedomi Tmaspfx Ahxsu
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electric connector
* Multi-chamber tail lights
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor, clamped design
* Fixture in front of the bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, fold-down with fold-down stanchion in the center
* Steel rear wall, slidable between ramps – storage bracket inside in front of bulkhead when not in use
* Rear posts bolted
* Perforated outer frame bent at approximately 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t drop-forged lashing brackets every 600 mm possible
* Lashing package: In each front and rear corner 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in the outer frame, various holes in the bulkhead and rear cross-member for 1.2 t lashing options
* One-piece sliding ramps, 12 t/pair, approx. 2,750 x 620 mm
* Rear loading slope approx. 860 mm
* Chassis, drawbar, bulkhead, rear flap, folding supports, and drive-on ramps hot-dip galvanized
* --- Axles, air tank, flanged towing eye, and landing gear painted in black tone ---
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available ex Egestorf
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
* Wabco EBS-E (electronic braking system)
* RDÜ tire monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lifting and lowering device
* Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm using offset plate
* Jost front landing gear
* Outward folding rear supports
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
Cpedomi Tmaspfx Ahxsu
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electric connector
* Multi-chamber tail lights
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor, clamped design
* Fixture in front of the bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, fold-down with fold-down stanchion in the center
* Steel rear wall, slidable between ramps – storage bracket inside in front of bulkhead when not in use
* Rear posts bolted
* Perforated outer frame bent at approximately 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t drop-forged lashing brackets every 600 mm possible
* Lashing package: In each front and rear corner 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in the outer frame, various holes in the bulkhead and rear cross-member for 1.2 t lashing options
* One-piece sliding ramps, 12 t/pair, approx. 2,750 x 620 mm
* Rear loading slope approx. 860 mm
* Chassis, drawbar, bulkhead, rear flap, folding supports, and drive-on ramps hot-dip galvanized
* --- Axles, air tank, flanged towing eye, and landing gear painted in black tone ---
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available ex Egestorf
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2001
Lähetä pyyntö
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Pieni ilmoitus
Egestorf
1 343 km
Matala lavetti perävaunu
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
Pieni ilmoitus
Twist
1 510 km
Vaihdettavalla alustalla varustettu perävaunu
WEB-TRAILERWechselanhänger 235/75 R17.5 / 970 - 1220mm
WEB-TRAILERWechselanhänger 235/75 R17.5 / 970 - 1220mm
Pieni ilmoitus
Schwebheim
1 634 km
Matala lavetti perävaunu
ObermaierOS2-TUE135S 13,5 t Tandemtieflader
ObermaierOS2-TUE135S 13,5 t Tandemtieflader
Pieni ilmoitus
Egestorf
1 343 km
Rullavavaunu
MÜLLER-MITTELTAL18 t. Kombi Abroller Absetzer Tieflader, Luft
MÜLLER-MITTELTAL18 t. Kombi Abroller Absetzer Tieflader, Luft
Pieni ilmoitus
Sittensen
1 358 km
Tilavuusyksikköveturi
MAN18.580 TGX LL XXL 4x2, Hydr., Intarder, Klima
MAN18.580 TGX LL XXL 4x2, Hydr., Intarder, Klima
Pieni ilmoitus
Egestorf
1 342 km
Työalustallinen perävaunu
MÜLLER-MITTELTAL14,4 to. Tiefl. , luftgefedert - Einschubrampen
MÜLLER-MITTELTAL14,4 to. Tiefl. , luftgefedert - Einschubrampen
Pieni ilmoitus
Egestorf
1 343 km
Matala lavetti perävaunu
MÜLLER-MITTELTAL18 t. Kombi Abroller Absetzer Tieflader, Luft
MÜLLER-MITTELTAL18 t. Kombi Abroller Absetzer Tieflader, Luft
Pieni ilmoitus
Kaltenkirchen
1 292 km
Matala kuormaaja
HumbaurHumbaur 11,9 t Tandem-Tieflader | ALU-BW | Rampenschacht HBT 106224 BE (Bohlen einschiebbar)
HumbaurHumbaur 11,9 t Tandem-Tieflader | ALU-BW | Rampenschacht HBT 106224 BE (Bohlen einschiebbar)
Pieni ilmoitus
Schwebheim
1 634 km
Matala lavetti perävaunu
MösleinTTT-11 6,20 Orange Neuer Tandemtieflader
MösleinTTT-11 6,20 Orange Neuer Tandemtieflader
Pieni ilmoitus
Schwebheim
1 634 km
Matala lavetti perävaunu
MösleinTT 21-6,5 21 t Tandemtieflader, Luftgefedert, NEU
MösleinTT 21-6,5 21 t Tandemtieflader, Luftgefedert, NEU
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe























































































































































































