Matala lavetti perävaunu

MÜLLER-MITTELTAL PT 40 Sonderpreis, Tieflader mit hydr. Rampen

* PT 40.0 profile:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 4 x 11 tonne Gigant axles
* Air suspension with lifting and lowering system and RtR valve
* Manometer pressure indicator for determining load weight (axles separated into 2 air suspension circuits)
* Side impact protection
* Swivel supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at the front and rear
* Front plastic quarter fender with splash guard
* Rear straight galvanized. Sheet steel aprons with splash guard
* Reflective contour tape on the side and rear
* EBS multi-voltage system with 12 & 24 V electrics
* 15-pin power plug
* LED lighting system 12 / 24 V
* LED rotating beacon (removable) at the rear
* 2 LED reversing lights (switched via reverse gear)
* Pull scissors with 50 mm pull eye and height adjustment
* Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high
* Front section in front of the bogie platform approx. 490 mm long with 45° corners
* ROBOT welded ANTI-SLIP coating for the steel plate of the bogie platform
* La-Si package consisting of: in front of the front wall support on the left & right 1 x 13.4 ton each. UVV lashing eye, 4 holes on each side in the bogie platform with a lashing force of 2 tons each, 1 pair of lashing eyes (13.4 tons) hanging at the rear left and right in front of the rear carrier, 4 pairs of UVV lashing rings (10 tons) on each side, can be swiveled and lowered, can be loaded in all directions and embedded in the outer frame, 3 stake pockets on each side with a simultaneous 2 ton lashing option
* Hot-dip galvanized mechanical folding boom for a total width of 3 meters (but not in the rear slope)
* Plank holder for widening under the chassis on the left in the longitudinal direction
* Excavator boom storage above the rear axle to the end carrier approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 tons on each side. Lashing rings in the excavator boom storage
Rjdpfx Ajl Tnu Aebasch
* Hardwood floor on the running surfaces of the low-loading platform
* Hydraulic one-piece ramps (approx. 3,000 x 720 mm) mechanically laterally adjustable
* Outer planks of the ramps made of hardwood
* Steel construction in preparation for 6-way control slide
* Loading edge unloaded approx. 950 mm +/+ 20 mm chassis
* Bogie, folding boom, mechanical drop supports, ramps hot-dip galvanized
* --Axles, air tank, pull scissors painted in a black tone--
* Tires 235/75 R 17.5
* Vehicle has a daily registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used
* New vehicle with manufacturer's warranty
* Errors and prior sale subject to reservation
* Available for immediate delivery from Egestorf

Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.