Matala lavetti perävaunuMÜLLER-MITTELTAL
14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
Matala lavetti perävaunu
MÜLLER-MITTELTAL
14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
kiinteä hinta ei sisällä ALV
28 500 €
(33 915 € bruttomassa)
Valmistusvuosi
2026
Kunto
Uusi
Sijainti
Egestorf 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
28 500 €
(33 915 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 10 900 kg
- Kokonaispaino:
- 14 400 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 5 000 mm
- Lastitilan leveys:
- 2 420 mm
- Kuormatilan korkeus:
- 500 mm
Tarjouksen tiedot
- Listaustunnus:
- A104-27-096
- Viitenumero:
- 57761
- Päivitetty viimeksi:
- 29.01.2026
Kuvaus
* Wabco EBS
* RDÜ Tire Pressure Monitoring System
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7-ton Gigant axles
* Parabolic springs with tandem compensating unit
* 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange drawbar eye
* Jost mechanical landing gear at the front
* 2 mechanical hot-dip galvanized folding supports at the rear
* 15-pin power connector
* LED taillights
* Hot-dip galvanized bolted underrun protection
* Toolbox made of galvanized sheet steel on the right side
* Plastic quarter fender
* Hot-dip galvanized chassis
* Steel pallet, 3-way tipping body
* Continuous side walls with inner tube reinforcement at the top - without center stanchions - foldable with side wall spring jack
* Tailgate foldable and swinging via manual Central locking system
* Hot-dip galvanized bolted rear stanchions
* 1 x 5-ton lashing ring in each corner and 4 x 3-ton lashing rings on each side. Lashing eyes embedded in the outer frame
* 4 mm sheet metal floor made of fine-grain steel
* Net hooks, rear mounting rail for the landing ramps
* Preparation for later retrofitting of side wall extensions
* Reinforced body with load securing certificate according to EN 12642 XL
* 2-step step on the left side as a climbing aid
* 1 pair of aluminum landing ramps approx. 3,570 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles
* Rear-locking storage compartment embedded in the chassis below the loading area
* Axles, springs, air tanks, and landing gear painted in a black tone
* Chassis, drawbar, floor, front wall, and folding bags are hot-dip galvanized
* New vehicle without first registration and with manufacturer's warranty
Bjdpfxel Th A Ee Ahxowh
* Tires 385/55 R 22.5
* Side walls painted in RAL 9010 pure white
* Paint finish Side panels available in a RAL color for an additional charge
* Errors and prior sale subject to change
* Available for immediate delivery from Egestorf
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
* RDÜ Tire Pressure Monitoring System
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7-ton Gigant axles
* Parabolic springs with tandem compensating unit
* 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange drawbar eye
* Jost mechanical landing gear at the front
* 2 mechanical hot-dip galvanized folding supports at the rear
* 15-pin power connector
* LED taillights
* Hot-dip galvanized bolted underrun protection
* Toolbox made of galvanized sheet steel on the right side
* Plastic quarter fender
* Hot-dip galvanized chassis
* Steel pallet, 3-way tipping body
* Continuous side walls with inner tube reinforcement at the top - without center stanchions - foldable with side wall spring jack
* Tailgate foldable and swinging via manual Central locking system
* Hot-dip galvanized bolted rear stanchions
* 1 x 5-ton lashing ring in each corner and 4 x 3-ton lashing rings on each side. Lashing eyes embedded in the outer frame
* 4 mm sheet metal floor made of fine-grain steel
* Net hooks, rear mounting rail for the landing ramps
* Preparation for later retrofitting of side wall extensions
* Reinforced body with load securing certificate according to EN 12642 XL
* 2-step step on the left side as a climbing aid
* 1 pair of aluminum landing ramps approx. 3,570 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles
* Rear-locking storage compartment embedded in the chassis below the loading area
* Axles, springs, air tanks, and landing gear painted in a black tone
* Chassis, drawbar, floor, front wall, and folding bags are hot-dip galvanized
* New vehicle without first registration and with manufacturer's warranty
Bjdpfxel Th A Ee Ahxowh
* Tires 385/55 R 22.5
* Side walls painted in RAL 9010 pure white
* Paint finish Side panels available in a RAL color for an additional charge
* Errors and prior sale subject to change
* Available for immediate delivery from Egestorf
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2001
Lähetä pyyntö
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Pieni ilmoitus
Egestorf
1 343 km
Kolmisuuntainen kippiperävaunu
MÜLLER-MITTELTAL14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
MÜLLER-MITTELTAL14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
Pieni ilmoitus
Triptis
1 502 km
Kippiauto 3-tie
FlieglTLK 118
FlieglTLK 118
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe




























































