Lava / pressuFliegl
SDS 390 RoadRunner
Lava / pressu
Fliegl
SDS 390 RoadRunner
EXW kiinteä hinta ei sisällä ALV
9 900 €
(11 781 € bruttomassa)
Valmistusvuosi
2015
Kunto
Käytetty
Sijainti
Triptis 

Näytä kuvat
Näytä kartta
Perustiedot
- Nimitys:
- Lava / pressu
- Valmistaja:
- Fliegl
- Malli:
- SDS 390 RoadRunner
- Ajoneuvonumero:
- WFDFLT33902017848
- Valmistusvuosi:
- 2015
- Kunto:
- käytetty
- Toiminnallisuus:
- täysin toimintakuntoinen
Hinta ja sijainti
EXW kiinteä hinta ei sisällä ALV
9 900 €
(11 781 € bruttomassa)
- Sijainti:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

Soita
Tekniset tiedot
- Omamassa:
- 6 537 kg
- Maksimi kuormauspaino:
- 28 463 kg
- Kokonaispaino:
- 35 000 kg
- Akselikokoonpano:
- 3 akselia
- Ensirekisteröinti:
- 10/2015
- Kuormatilan pituus:
- 13 650 mm
- Lastitilan leveys:
- 2 480 mm
- Kuormatilan korkeus:
- 2 790 mm
- Renkaan koko:
- 385/65 r22.5
- Väri:
- hopea
Tarjouksen tiedot
- Listaustunnus:
- A905-86-31
- Viitenumero:
- 37357
- Päivitetty viimeksi:
- 06.05.2025
Kuvaus
Further information
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Laedpokyrmijfx Abwsk
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm
BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h)
Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg
Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection.
Laedpokyrmijfx Abwsk
Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröity alkaen:: 2006
Lähetä pyyntö
Puhelin & Faksi
+49 36482... ilmoitukset
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe










