Kippipuoliperävaunu

Fliegl DHKA 390 38 m³

Customized Transport Solution
Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements.

Chassis, Saddle Tipper
Fine-grained steel welded construction, lightweight design, saddle plate with 2 interchangeable kingpins
Curved front end, patented
Telescopic support in the center, uncoupling not possible with load, in the uncoupled state, the vehicle must be tilted backwards.
2 chock blocks with holder
Underrun protection, foldable
Semi-shell fenders
Integrated fender holder, surface resistant to stone chipping
With anti-splash flaps, only on the last axle
1 tarpaulin rod with holder
2 towing hooks at the rear
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter
Axle/chassis laser-aligned to reduce tire wear and fuel consumption
Axles in off-road design
Air suspension
1st axle, automatic lift axle, including forced lowering and starting aid, actuated 3 times by the brakes
Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through
Braking System
2-line compressed air braking system, color-coded lines for easy servicing
Spring-loaded parking brake
2 non-interchangeable coupling heads at the front
EBS, electronic braking system with EBS socket at the front
With lifting and lowering valve
Vehicle - Driving Stability System
Wheels and Tires
385/65 R22.5, manufacturer at the discretion of the manufacturer
Steel rims, factory silver
Electrical System
24 volts, multi-chamber lights, yellow LED lighting on the sides
2 white position lights at the front
2 white/red side marker lights at the rear
2 x 7-pole non-interchangeable sockets at the front, without connection cable
Hydraulics
Low-pressure cylinder, max. 170 bar, smallest stage hard chrome-plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection)
Actuation hydraulically via truck auxiliary drive
Tippers
Aluminum box tipper made of high-quality, abrasion-resistant steel, front wall 5 mm thick, with external stiffeners made of 30 mm hollow profile, cleanly welded, with an upper profile that prevents spillage. Inside with ladder on the front wall (not in conjunction with Cramaro).
Shovel and broom holder outside on the front wall.
Greenline - conical and aerodynamic tipper body shape
Membrane - rear wall
Rear wall as a hinged flap with double-joint hinge, externally supported with 2-fold hook locking.
Rear wall with rubber seal. Note! Heat resistant up to max. 170°C!
Floor continuously 6 mm thick
Standing platform with ladder, connection plate for air/electrical and brake with large clearance for best possible operation.
Lsdpfx Asi Riz Roqvsah
Roller cover, one-sided for placement on the right side, with central locking on the left side
Painting
Frame DB 7350 Novagrau
10 years

Customized Transport Solution
Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements.

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.