Avoin puoliperävaunu pressulla

WEB-TRAILER 1-Achs-City-Sattelauflieger TRIDEC + LBW

PRSSQTri 09-SYS with superstructure, 1-axle, tail lift
Twin tires 22.5 TRIDEC
----

Curtainsider superstructure, side height 2600 mm from the loading area to the bottom edge of the outer frame
Maximum steering angle 31°
Mechanical steering system with 1 tie rod for steering one axle

Chassis width approx. 2480 mm
Fifth wheel load max. approx. 12000 kg
Support winch position approx. 2300 mm from the kingpin
Chassis length approx. 11,105 mm
Axle loads: 10,000 kg
Unladen ride height approx. 1300 mm with a fifth wheel height of 1150 mm
Approval with COC documents

*Outer frame height approx. 125 mm, with groove for lashing eyes, base thickness approx. 4 mm, with lashing holes on the outside
11 pairs of lashing eyes in the outer frame
(tested lashing force 5t per lashing point)
24-ton telescopic support winch

Axle
Free choice of axle manufacturer by WEB Trailers (SAF/BPW/Jost)
Axle with large disc brake
Axle 10t disc 22.5" twin tires

Air suspension unit per 10 t
Raising and lowering device
Kingpin, red and yellow
Raising and lowering device mounted at the rear right in the direction of travel
Air tank 2 x approx. 80 l in steel, painted black
EBS braking system, manufacturer Knorr or Wabco incl. RSS
Tire pressure monitoring system
4 branded tires 275/70 R 22.5, branded manufacturer on steel rim (branded manufacturer as chosen by WEB Trailer)

Tail lift
Platform with roll-over protection
Platform, steel - tread plate
Front plug connection for the tail lift as a Rema socket (without batteries! optional)
Tail lift, 2.5t, as chosen by us
Documentation, manual etc.
Operation via control unit in the box at the rear right and remote control
with spiral cable in the superstructure at the top right
Platform height approx. 2000mm (standard, rear locking)
Flashing lights on the tail lift platform
Polarity reversal protection on the plus and minus lines (red+blue)
Tail lift manufacturer as chosen by WEB Trailer

Superstructure certificate according to DIN EN 12642 XL (for 27t payload + tail lift) with min. 2 rows of wooden insert battens and locking on the platform at the top

Contour marking on tarpaulins and rear door
ECE signs on the tail lift
Position lights at the rear top in red (LED)
Rear sliding roof, fixed
Top flap for the tail lift with gas spring
Position lights at the front top and bottom in white with reflector (LED)
3 sets of side sliding tarpaulins, manufacturer as chosen by WEB
Front wall, steel, standard with 400mm steel cassettes
inner wear plate approx./max. 2.40m
3 rows of wooden insert battens

Lighting system, 24 Volt LED with small multifunction light
15-pole plug
flashing side marker lights

Roof tarpaulin, reinforced version with 12x12 roof fabric
Ratchet tensioner at the rear, releasing mechanism at the front only
2 steel bumper at the rear at the corners
Plastic fenders, 180 degrees
Splash guard/spray flap
Lateral impact protection on both sides, aluminum, steel profile or plastic

Superstructure certificate according to DIN EN 12642 XL

Coating/Painting:

Painting of the chassis in RAL 9005 or Novagrau 7350, other colors at an extra charge, subject to color availability in powder coating

KTL coating with zinc phosphating plus powder coating, highest level of corrosion protection

Hot-dip galvanizing optionally possible

Ppsdpfx Aeg Dkyqom Ssu
Superstructure colors in RAL as desired

Approval:

COC

Price ex works

Attention!!!
Pictures show optional equipment

Let us advise you and prepare a free and non-binding offer.
Leasing, financing or hire

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.