AvoperävaunuWEB-TRAILER
HARTHOLZ-Tandem Baustoffanhänger
Avoperävaunu
WEB-TRAILER
HARTHOLZ-Tandem Baustoffanhänger
kiinteä hinta ei sisällä ALV
25 460 €
(30 297 € bruttomassa)
Valmistusvuosi
2025
Kunto
Uusi
Sijainti
Twist 

Näytä kuvat
Näytä kartta
Perustiedot
Hinta ja sijainti
kiinteä hinta ei sisällä ALV
25 460 €
(30 297 € bruttomassa)
- Myyjän sijainti:
- Otto-Hahn-Straße 1, 49767 Twist, Saksa
Soita
Tekniset tiedot
- Kokonaispaino:
- 18 000 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 7 200 mm
- Lastitilan leveys:
- 2 480 mm
- Kuormatilan korkeus:
- 600 mm
- Kokonaisleveys:
- 2 540 mm
- Varusteet:
- ABS
Tarjouksen tiedot
- Listaustunnus:
- A600-53-47
- Viitenumero:
- 9D8707
- Päivitetty viimeksi:
- 25.06.2025
Kuvaus
WEB-Trailer ZPRAH 18 Tandem building material trailer hardwood floor
Chassis length approx. 7200mm (6000- 8000 mm)
Chassis width approx. 2480mm
Axle loads: 18,000 g (2 x 9000kg)
Coupling height approx. 400mm unloaded (center of towing eye)
Riding height unloaded approx. 930mm
Support load at front approx. 1000kg
Spring center approx. 1100 mm
COC
Outer frame height approx. 125 mm, 4 mm with groove for lashing eyes
7 pairs of lashing eyes (bracket) screwed into the outer frame with groove, 5t each!!
1 set of rear drop supports, height adjustable
1 set of front support winches, one-sided operation, rigid drawbar (centre tube) with screwed-on towing eye, towing eye ø 50mm
Axles of choice from manufacturer (SAF/BPW/Jost)
2 axles 9 tonnes 17.5" drum brake, twin tires for air suspension
Lifting and lowering device with 1 rotary slide valve Knorr/Wabco air suspension unit 9 tonnes load capacity each, total lift approx. 180mm
Axle spacing approx. 1310mm
Two-line pneumatic brake system in accordance with EC Directive 71/320, make of choice from manufacturer
Coupling head red and yellow
EBS brake system, make Knorr or Wabco, make of choice from manufacturer with
RSS
Tire pressure control
Flashing SML
Brand tires 235/75 R 17.5 on steel wheel, manufacturer of choice
Side wall in anodized design, height approx. 600mm 2x2
Front wall approx. 600mm high, with sheet metal cladding, screwed-on
Lighting system 24 LED
2 x 7-pin or 15-pin
Position lights at the front
Guodpfog Dkxdex Abmeh
Hardwood floor 28mm alternating with galvanized Omega steel profiles
Access ladder at the rear right
Underrun protection (profiled) in screwed-on design
2 impact buffers at the rear on the corners
Plastic fenders, 180 degrees, above each axle
Anti-spray mud flaps 1 pair
Chassis painted in RAL
KTL coating with zinc phosphating plus powder, highest
corrosion protection
or hot-dip galvanized
Price ex works
Attention!!!
Pictures show special equipment
Let us advise you and work out a free and non-binding offer. Leasing, financing or hire purchase possible! We can accommodate your wishes! Ask us - we will be happy to make you an offer.
Errors and prior sale reserved!!!
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Chassis length approx. 7200mm (6000- 8000 mm)
Chassis width approx. 2480mm
Axle loads: 18,000 g (2 x 9000kg)
Coupling height approx. 400mm unloaded (center of towing eye)
Riding height unloaded approx. 930mm
Support load at front approx. 1000kg
Spring center approx. 1100 mm
COC
Outer frame height approx. 125 mm, 4 mm with groove for lashing eyes
7 pairs of lashing eyes (bracket) screwed into the outer frame with groove, 5t each!!
1 set of rear drop supports, height adjustable
1 set of front support winches, one-sided operation, rigid drawbar (centre tube) with screwed-on towing eye, towing eye ø 50mm
Axles of choice from manufacturer (SAF/BPW/Jost)
2 axles 9 tonnes 17.5" drum brake, twin tires for air suspension
Lifting and lowering device with 1 rotary slide valve Knorr/Wabco air suspension unit 9 tonnes load capacity each, total lift approx. 180mm
Axle spacing approx. 1310mm
Two-line pneumatic brake system in accordance with EC Directive 71/320, make of choice from manufacturer
Coupling head red and yellow
EBS brake system, make Knorr or Wabco, make of choice from manufacturer with
RSS
Tire pressure control
Flashing SML
Brand tires 235/75 R 17.5 on steel wheel, manufacturer of choice
Side wall in anodized design, height approx. 600mm 2x2
Front wall approx. 600mm high, with sheet metal cladding, screwed-on
Lighting system 24 LED
2 x 7-pin or 15-pin
Position lights at the front
Guodpfog Dkxdex Abmeh
Hardwood floor 28mm alternating with galvanized Omega steel profiles
Access ladder at the rear right
Underrun protection (profiled) in screwed-on design
2 impact buffers at the rear on the corners
Plastic fenders, 180 degrees, above each axle
Anti-spray mud flaps 1 pair
Chassis painted in RAL
KTL coating with zinc phosphating plus powder, highest
corrosion protection
or hot-dip galvanized
Price ex works
Attention!!!
Pictures show special equipment
Let us advise you and work out a free and non-binding offer. Leasing, financing or hire purchase possible! We can accommodate your wishes! Ask us - we will be happy to make you an offer.
Errors and prior sale reserved!!!
Mainos käännettiin automaattisesti ja käännösvirheet ovat mahdollisia.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Lähetä pyyntö
Puhelin & Faksi
+49 5936 ... ilmoitukset
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe