Avoin puoliperävaunu pressulla
KÖGEL CARGO Pritschensattelanhänger

Kunto
Uusi
Sijainti
Essen Saksa
Avoin puoliperävaunu pressulla KÖGEL CARGO Pritschensattelanhänger
Avoin puoliperävaunu pressulla KÖGEL CARGO Pritschensattelanhänger
Avoin puoliperävaunu pressulla KÖGEL CARGO Pritschensattelanhänger
Avoin puoliperävaunu pressulla KÖGEL CARGO Pritschensattelanhänger
Avoin puoliperävaunu pressulla KÖGEL CARGO Pritschensattelanhänger
Avoin puoliperävaunu pressulla KÖGEL CARGO Pritschensattelanhänger
Avoin puoliperävaunu pressulla KÖGEL CARGO Pritschensattelanhänger
Avoin puoliperävaunu pressulla KÖGEL CARGO Pritschensattelanhänger
Avoin puoliperävaunu pressulla KÖGEL CARGO Pritschensattelanhänger
more Images
KÖGEL CARGO Pritschensattelanhänger
KÖGEL CARGO Pritschensattelanhänger
KÖGEL CARGO Pritschensattelanhänger
KÖGEL CARGO Pritschensattelanhänger
KÖGEL CARGO Pritschensattelanhänger
KÖGEL CARGO Pritschensattelanhänger
KÖGEL CARGO Pritschensattelanhänger
KÖGEL CARGO Pritschensattelanhänger
KÖGEL CARGO Pritschensattelanhänger

Perustiedot

Hinta ja sijainti

Myyjän sijainti:
Heegstraße 6-8, 45356 Essen, Saksa Saksa
Soita

Tekniset tiedot

Mitat ja paino

Kokonaispaino:
42 000 kg
Maksimi kuormauspaino:
35 020 kg

Akselit ja pyörät

Akselikokoonpano:
3 akselia

Turvaominaisuudet

ABS

Tarjouksen tiedot

Ilmoituksen tunnus:
A233-66-680
Viitenumero:
38614
Päivitys:
viimeksi 21.11.2026

Kuvaus

You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt from the equipment list. Complete equipment list available upon request.

10300.108: Coupling plate, approximately 8 mm thick, with a 2-inch fifth-wheel kingpin according to DIN 74080 / ISO 337.
Chassis:
I 17160.010: Axle lift mechanism on axle 1.
18330.700: Manufacturer (optional): Kögel - Three-axle unit, with disc brakes, approximately 430 mm in diameter, offset approximately 120 mm. Air suspension with approximately 180 mm of travel.
Vehicle Tires:
20540.040: Tires 6x 385/65 R 22.5, ATHOS HG 2144 (164J).
Chassis Components:
20110.010: Fifth-wheel supports (manufacturer optional: Kögel), mechanically adjustable with leveling foot, lifting capacity approximately 24 tons. Single-side operation on the right when traveling.
21070.115: Splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011, for three-axle unit with 385/65 R22.5 tires, consisting of 1 pair of quarter-circle mudguards in front of the axles, and 1 pair of quarter-circle mudguards with splash flaps behind the axles.
I 25010.025: Pallet box for 24 Euro pallets, completely enclosed, protected against spray water, and also acts as a lateral protective device.
I 25090.220: Ground clearance (front) approximately 220 mm.
I 25470.060: Storage for 8 square tube inserts, dimensions: approximately 340 x 220 x 2,150 mm. Installation behind the axle unit.
Brake / Air Suspension System:
32110.057: EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connecting lines), parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection.
32125.010: EBS system (manufacturer optional: Kögel).
33420.040: Air suspension system including 1 lifting and lowering valve, mounted on the left side while traveling behind the axle unit. Driving position is automatically adjusted.
Floor:
40510.120: Plate floor, approximately 30 mm thick.
I 40513.020: Floor sealed around the edges.
I 40542.011: Pocket for square tube inserts, approximately 80 x 80 mm, arrangement according to drawing A2: 2 pairs on the longitudinal beam in the 1st and 2nd positions, 8 pairs in the outer frame.
Superstructure:
L 46502.011: Quick-release system at the front for side tarpaulin with tension bars and pivoting lever.
46503.010: Quick-release system at the rear for side tarpaulin with tension bars and ratchet.
46538.010: Meets superstructure strength requirements according to EN 12642 XL (VDI 2700). Tested for a payload of 27,000 kg.
Front Wall:
41510.125: Front wall in superstructure height with aluminum corner profiles, riveted with aluminum hollow profiles, bolted/riveted to the frame.
Rear Wall:
42400.563: Double-leaf rear portal door made of aluminum, approximately 2,630 mm wide.
42505.040: 4 integrated twist-lock fasteners (2 on the left, 2 on the right), manufacturer optional: Kögel.
Kodpfx Ae Alda Eec Uodw
I 42540.256: Bolted steel corner profiles at the rear in portal height with additional ram protection up to the first door hinge.
Side Wall:
I 27140.010: Snap-in profile on the outer frame for sliding tarpaulin (required for pockets in the outer frame).
43500.300: 3 pairs of KÖGEL sliding beams with a receiving height of approximately 600 mm for 5 insert slats stacked on top of each other from the top edge of the floor. Firmly att

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.

Toimittaja

Rekisteröitynyt vuodesta: 2003

68 Verkkoilmoitukset

Soita

Lähetä kysely

Maaus 
Saksa
Itävalta
Sveitsi
Yhdysvallat
Yhdistynyt kuningaskunta
Ranska
Belgia
Espanja
Meksiko
Italia
Alankomaat
Puola
Venäjän federaatio
Valko-Venäjä (Valko-Venäjän tasavalta)
Ukraina
Viro
Turkki
Uusi-Seelanti
Irlanti
Tšekin tasavalta
Tanska
Suomi
Ruotsi
Norja
Luxemburg
Kreikka
Liettua
Latvia
Islanti
Portugali
Brasilia
Venezuela
Argentiina
Unkari
Slovakia
Romania
Moldova
Slovenia
Serbia
Montenegro
Albania
Kroatia
Bulgaria
Pohjois-Makedonia
Bosnia ja Hertsegovina
Israel
Egypti
Marokko
Intia
Indonesia
Etelä-Korea
Japani
Thaimaa
Malesia
Vietnam
Kiina, Kansantasavalta
Taiwan
Iran
Bangladesh
Pyyntöä ei voitu lähettää. Yritä myöhemmin uudelleen.

Puhelin & Faksi

+49 201 8... ilmoitukset