Työalustallinen puoliperävaunu
ES-GE 3-Achs Sattelanhänger - Bordwände + CV

Kunto
Uusi
Sijainti
Essen Saksa
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
more Images
ES-GE 3-Achs Sattelanhänger - Bordwände + CV
ES-GE 3-Achs Sattelanhänger - Bordwände + CV
ES-GE 3-Achs Sattelanhänger - Bordwände + CV
ES-GE 3-Achs Sattelanhänger - Bordwände + CV
ES-GE 3-Achs Sattelanhänger - Bordwände + CV
ES-GE 3-Achs Sattelanhänger - Bordwände + CV
ES-GE 3-Achs Sattelanhänger - Bordwände + CV
ES-GE 3-Achs Sattelanhänger - Bordwände + CV

Hinta ja sijainti

Myyjän sijainti:
Heegstraße 6-8, 45356 Essen, Saksa Saksa
Soita

Tekniset tiedot

Mitat ja paino

Kokonaispaino:
43 000 kg
Maksimi kuormauspaino:
35 440 kg

Akselit ja pyörät

Akselikokoonpano:
3 akselia

Turvaominaisuudet

ABS

Tarjouksen tiedot

Ilmoituksen tunnus:
A233-66-668
Viitenumero:
36622
Päivitys:
viimeksi 21.11.2026

Kuvaus

You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website.

Excerpt from the equipment:
Complete equipment available upon request.

Chassis
* Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads.
* Underrun protection, width approx. 700 mm, outer frame as a UNP profile, wear plate approx. 8 mm, front neck height approx. 130 mm.

Coupling device
* 2-inch kingpin hitch: 2 x 12 t hitches with level foot and single-side operation on the right-hand side.

Axles
* 3 x 9 t air suspension axle unit, disc brakes 22.5, total travel approx. 180 mm, lifting and lowering device via rotary valve.

Braking system
* Two-circuit air brake system according to EC with EBS and RSS.
* Automatic load-dependent regulation.
* Spring brake cylinders as parking brake.
* Interlock-protected coupling heads fixed to the front cross member, without connection line to the towing vehicle.

Tires
* 6, 385/55 R22,5 160J on steel rim 11.75 X 22,5 ET 120.
* Manufacturer of our choice, tire pressure monitoring system (TPMS) via CAN-bus system of the EBS.

Load securing
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t.
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t.
* In the outer frame, holes approx. every 400-600 mm for attaching lashing straps.

Front wall
* Reinforced steel construction, fixed, approx. 1,400 mm high, interior paneling with approx. 9 mm screen-printed sheet (approx. 1,250 mm high).
Kode Aldapopfx Ac Uodw

Floor
* Approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles.

Lighting system
* According to EC, 24 volts.
* With multi-chamber lights.
* LED side marker lights.
* LED position lights, white, front.
* LED outline lights, rear.
* License plate lights.
* Lane-keeping lights, LED. 1x15- and 2x7-pin connectors on the front cross member.

Equipment
* 2 wheel chocks with holder.
* Warning signs ECE 70.
* Holder for rotating beacon, including rotating beacon.
* 2 rubber rub rails at the rear.
* Folding and extendable ladder at the rear right (without platform).
* 1 open box made of perforated sheet, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles.

Paint
* Front wall: RAL 9005 deep black.
* Chassis: Hot-dip galvanized, outer frame hot-dip galvanized + RAL 9005 deep black.
* Middle beams: RAL 9005 deep black.
* SSV: Aluminum, anodized.
* Underrun protection: white (RAL 9016 traffic white).
* Components: galvanized/black KTL coating.
* Rims: silver.
* Contour marking: complete, yellow.

Incl. accessories
* First axle can be lifted, with fully automatic, load-dependent lift control.
* 10 pairs of stake pockets in the outer frame, evenly distributed.
* 4 rows of stake pockets transverse to the loading area.
* 20 pieces of stakes made of galvanized tube 80/50, total length approx. 1,200 mm.
* Inside on the front wall, a magazine for 20 pieces of plug-in stakes.
* 5 x 250 mm side walls and rear wall made of anodized aluminum hollow profiles, foldable and removable.
* Removable Kinnegrip stakes.
* Side wall and stake magazine: under the chassis, left and right, slide rails for side walls and stakes. Container locks for 1 x 40" and 2 x 20" containers, flush at the rear. Container locks for 1 x 20" container, in the middle.
* Work lights on the lamp carrier (switched on when reverse gear is eng

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.

Toimittaja

Rekisteröitynyt vuodesta: 2003

68 Verkkoilmoitukset

Soita

Lähetä kysely

Maaus 
Saksa
Itävalta
Sveitsi
Yhdysvallat
Yhdistynyt kuningaskunta
Ranska
Belgia
Espanja
Meksiko
Italia
Alankomaat
Puola
Venäjän federaatio
Valko-Venäjä (Valko-Venäjän tasavalta)
Ukraina
Viro
Turkki
Uusi-Seelanti
Irlanti
Tšekin tasavalta
Tanska
Suomi
Ruotsi
Norja
Luxemburg
Kreikka
Liettua
Latvia
Islanti
Portugali
Brasilia
Venezuela
Argentiina
Unkari
Slovakia
Romania
Moldova
Slovenia
Serbia
Montenegro
Albania
Kroatia
Bulgaria
Pohjois-Makedonia
Bosnia ja Hertsegovina
Israel
Egypti
Marokko
Intia
Indonesia
Etelä-Korea
Japani
Thaimaa
Malesia
Vietnam
Kiina, Kansantasavalta
Taiwan
Iran
Bangladesh
Pyyntöä ei voitu lähettää. Yritä myöhemmin uudelleen.

Puhelin & Faksi

+49 201 8... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Pieni ilmoitus
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
more images
Essen
1 622 km
Työalustallinen puoliperävaunu
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Soita
Pieni ilmoitus
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
more images
Essen
1 622 km
Työalustallinen puoliperävaunu
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Soita
Pieni ilmoitus
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
Työalustallinen puoliperävaunu ES-GE 3-Achs Sattelanhänger - Bordwände + CV
more images
Essen
1 622 km
Työalustallinen puoliperävaunu
ES-GE3-Achs Sattelanhänger - Bordwände + CV
Soita