Vaihdettava kori laatikkorakenteellaKerex
Fifty Box
Vaihdettava kori laatikkorakenteella
Kerex
Fifty Box
VB alv 0% (veroton)
4 443 €
(5 376 € bruttomassa)
Kunto
Käytetty
(täysin toimintakuntoinen)
Sijainti
Praha 

Perustiedot
- Nimitys:
- Vaihdettava kori laatikkorakenteella
- Valmistaja:
- Kerex
- Malli:
- Fifty Box
- Kunto:
- käytetty
- Toiminnallisuus:
- täysin toimintakuntoinen
Hinta ja sijainti
VB alv 0% (veroton)
4 443 €
(5 376 € bruttomassa)
- Sijainti:
- Praha, Tšekin tasavalta

Tekniset tiedot
Mitat ja paino
Kokonaispaino:
2 700 kg
Omamassa:
1 500 kg
Maksimi kuormauspaino:
1 200 kg
Kuormatilan tilavuus:
22 m³
Kuormatilan pituus:
3 750 mm
Lastitilan leveys:
2 550 mm
Kuormatilan korkeus:
2 750 mm
Lisätietoja
Väri:
valkoinen
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A233-13-801
- Päivitys:
- viimeksi 10.11.2026
Kuvaus
Floor unit
Made of bent profiles with a thickness of 4 mm, steel grade 52.2, floor structure with a height of 203 or 180 mm, floor plate made of non-slip, waterproof plywood with a thickness of 27 mm (24 mm). Fastening elements with a special design, four rigid or telescopic supports, extendable door ladder. The guide tunnel with a width of 600 mm is made of two closed profiles. A protective profile to prevent damage during transport is located at the front.
Housing – trapezoidal
Side, front, and roof panels are made of galvanized perforated sheet metal, grade St. 37.2. The rear portal consists of double-leaf doors made of galvanized sheet metal or roll-up gates. A protective profile with a height of approximately 250 mm is located at the bottom edge of the body. The body frame is made of bent profiles with a thickness of 3 and 3.5 mm, steel grade St. 37.2. Four ventilation openings in the side walls. Steel bumpers are located in the lower part of the rear portal to protect the body from damage.
Housing – smooth
Side and front panels are made of smooth cassettes made of galvanized sheet metal, grade St. 37.2, roof panels are made of galvanized perforated sheet metal, the rear portal consists of double-leaf smooth doors made of galvanized sheet metal or roll-up gates, a protective profile with a height of 250 mm is located at the bottom edge of the body. The body frame is made of bent profiles with a thickness of 3 and 3.5 mm, steel grade St. 37.2, four ventilation openings in the side walls. Steel bumpers protecting the body from damage are located in the lower part of the rear portal.
Surface treatment and marketing description
Sandblasting to SA 2.5
Chemical degreasing and preliminary chemical treatment for corrosion protection in the immersion tube
Cathodic immersion coating in a light shade on the outside and inside
Powder coating in RAL color on the outside and inside upon customer request
Marking and warning labels according to DIN 284, DIN 283 standards
Marketing description according to the proposal
Fgsdpfx Ae Aitplsfpoi
Contact: Mon-Fri from 8 am to 4 pm, I respond to SMS messages
The container is currently in the Czech Republic (Prague).
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Made of bent profiles with a thickness of 4 mm, steel grade 52.2, floor structure with a height of 203 or 180 mm, floor plate made of non-slip, waterproof plywood with a thickness of 27 mm (24 mm). Fastening elements with a special design, four rigid or telescopic supports, extendable door ladder. The guide tunnel with a width of 600 mm is made of two closed profiles. A protective profile to prevent damage during transport is located at the front.
Housing – trapezoidal
Side, front, and roof panels are made of galvanized perforated sheet metal, grade St. 37.2. The rear portal consists of double-leaf doors made of galvanized sheet metal or roll-up gates. A protective profile with a height of approximately 250 mm is located at the bottom edge of the body. The body frame is made of bent profiles with a thickness of 3 and 3.5 mm, steel grade St. 37.2. Four ventilation openings in the side walls. Steel bumpers are located in the lower part of the rear portal to protect the body from damage.
Housing – smooth
Side and front panels are made of smooth cassettes made of galvanized sheet metal, grade St. 37.2, roof panels are made of galvanized perforated sheet metal, the rear portal consists of double-leaf smooth doors made of galvanized sheet metal or roll-up gates, a protective profile with a height of 250 mm is located at the bottom edge of the body. The body frame is made of bent profiles with a thickness of 3 and 3.5 mm, steel grade St. 37.2, four ventilation openings in the side walls. Steel bumpers protecting the body from damage are located in the lower part of the rear portal.
Surface treatment and marketing description
Sandblasting to SA 2.5
Chemical degreasing and preliminary chemical treatment for corrosion protection in the immersion tube
Cathodic immersion coating in a light shade on the outside and inside
Powder coating in RAL color on the outside and inside upon customer request
Marking and warning labels according to DIN 284, DIN 283 standards
Marketing description according to the proposal
Fgsdpfx Ae Aitplsfpoi
Contact: Mon-Fri from 8 am to 4 pm, I respond to SMS messages
The container is currently in the Czech Republic (Prague).
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Palveluntarjoaja on tällä hetkellä tarkastuksessa. Pyyntösi välitetään, ja tarjoaja voi vastata, kun tarkastus on onnistuneesti suoritettu.
Lähetä kysely
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe








