Tipper trailer

Krampe FLEXBODY ZDK 18-500

FLEXBODY ZDK 18-500
0010 Krampe three-sided tipper ZDK 18-500 Carrier
0020 Two-axle three-sided tipper (turntable trailer)
0030 Tare weight with side walls 80 + 80 cm approx. 4,620 kg
0040 Vehicle frame made of high-strength steel, I-beam
0050 Tires 385/65 R 22.5 / Albourgh WTR 69 M+S EPT 0
0060 Radial tires, new / Load index 164 K, 10-hole rims
0070 Drawbar GNZ 27 / 2100 mm with 40 mm drawbar eye
0080 40 km/h version
0090 Underrun protection, fixed
0100 Air brake system
0110 Lighting system LED
0120 Side marker light
Crede Ah Uvhopfx Akxei
0130 Axle assembly - installation GK 10/100 P
0140 Axle BPW 400x120 / 120x120 / 1.95 m / 10-L / ST
0150 Fenders
0160 Trailer coupling G140 A, automatic
0170 Hydraulic system, oil at the rear
0180 Air connection for 2nd trailer, two-line system
0190 Telescopic cylinder, 4-stage, oil requirement 19 liters, stroke 2,000 mm
0200 Platform DK 18-500
0210 Body with platform dimensions 5.00 x 2.42 m internally
0220 Floor plate 4 mm thick
0230 Torsionally rigid steel platform floor
0240 Robust central locking at the bottom
0250 Side wall set 5,000 x 2,420 x 800 mm
0260 Steel side walls for lower platform floor, 80 cm high
0270 Transport volume without extension side walls 9.75 m3
0280 Rear tailgate, tilting / pivoting 2,420 x 800 mm
0290 Side wall set 5,000 x 2,420 x 800 mm
0300 2nd extension side wall, steel, 5.00 m long, 80 cm high
0310 Volume increase + 9.75 m3
0320 Work platform on the front wall with galvanized grating
0330 Load compartment cover, roll tarp
0340 Winding tube with hand crank, closed position
0350 Can be used on the right and left
0360 Painting of chassis and tipping platform in Krampe-Gray
0370 semi-gloss (2-component paint)
0380 Painting of the side walls in Krampe-Red (similar to RAL 3002)
0390 semi-gloss (2-component paint)
0400 Painting of the rims in silver
0410 Hydraulic coupling
0420 EU type approval

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.