Matala lavetti perävaunuMÜLLER-MITTELTAL
Etütar 14,4 verkürzte Bordwände, LED Rundum
Matala lavetti perävaunu
MÜLLER-MITTELTAL
Etütar 14,4 verkürzte Bordwände, LED Rundum
Kiinteä hinta alv 0% (veroton)
29 250 €
(34 808 € bruttomassa)
Kunto
Uusi
Sijainti
Alsdorf 

Perustiedot
Hinta ja sijainti
Kiinteä hinta alv 0% (veroton)
29 250 €
(34 808 € bruttomassa)
- Myyjän sijainti:
- Carl - Zeiss - Straße 26, 52477 Alsdorf, Saksa

Soita
Tekniset tiedot
Mitat ja paino
Kokonaispaino:
14 400 kg
Maksimi kuormauspaino:
10 880 kg
Kuormatilan pituus:
6 270 mm
Lastitilan leveys:
2 470 mm
Kuormatilan korkeus:
400 mm
Akselit ja pyörät
Akselikokoonpano:
2 akselia
Turvaominaisuudet
ABS
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A232-23-586
- Viitenumero:
- 11732
- Päivitys:
- viimeksi 30.10.2026
Kuvaus
* Müller Mitteltal ETÜ-TA-R 14.4 Low-loader, drive-over design with shortened side walls
* Also ideal for use as a platform – as the stanchions can be quickly removed and the side walls can be locked in place
* RAL 7035 light grey
* GVW: 14.4 t, payload: 10.88 t
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
* Unladen floor height 930 mm / laden floor height 870 mm
* Chassis, front panel, ramps, drawbar: hot-dip galvanized
* Wooden floor in a clamped design
* 4 UVV-compliant lashing eyes (LC 6300 daN)
* Perforated outer frame, 45° bent, with hole pattern for lashing equipment, lashing force per lashing point LC 2000 daN with a minimum spacing of 480 mm.
* 10 UVV-compliant lashing eyes LC 3000 daN, recessed in the existing hole pattern in the outer frame
* Ramps, one-piece, with hot-dip galvanized grating in a non-slip design, can be slid together to approximately 20 mm
* Side walls in special design, shortened to just before the rear slope with folding and removable rear stanchions
* Locking of the folded-down side walls – making it easy to use as a platform
* Ramp securing system with retaining bar and diagonal support
* Ramp lifter with vertically positioned, adjustable springs for easy single-person operation
* Rear panel 300 mm, aluminum, plug-in design
* 1 toolbox in front of the front panel
* Excavator bucket rest made of hardwood, screwed onto the front panel
* 2 additional LED reversing lights
* 1 removable rotating LED warning light at the rear
* Height-adjustable support jacks at the front, folding supports at the rear
* Drawbar with 40 mm tow hitch, height-adjustable; 50 mm hitch also available on request
* In front of the front panel, device for the subsequent installation of 2 containers – locking mechanisms
* ----Leasing, hire purchase, financing, trade-in possible
* e.g. €585 net with a term of 60 months
* We have been a Müller Mitteltal sales partner for over 10 years
* Our opening hours
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
Outside of opening hours, we are available by appointment
Rcodpfo Af Dlcex Aiceh
We speak German, we speak English, mowimy po polsku, on parle français.
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
* Also ideal for use as a platform – as the stanchions can be quickly removed and the side walls can be locked in place
* RAL 7035 light grey
* GVW: 14.4 t, payload: 10.88 t
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
* Unladen floor height 930 mm / laden floor height 870 mm
* Chassis, front panel, ramps, drawbar: hot-dip galvanized
* Wooden floor in a clamped design
* 4 UVV-compliant lashing eyes (LC 6300 daN)
* Perforated outer frame, 45° bent, with hole pattern for lashing equipment, lashing force per lashing point LC 2000 daN with a minimum spacing of 480 mm.
* 10 UVV-compliant lashing eyes LC 3000 daN, recessed in the existing hole pattern in the outer frame
* Ramps, one-piece, with hot-dip galvanized grating in a non-slip design, can be slid together to approximately 20 mm
* Side walls in special design, shortened to just before the rear slope with folding and removable rear stanchions
* Locking of the folded-down side walls – making it easy to use as a platform
* Ramp securing system with retaining bar and diagonal support
* Ramp lifter with vertically positioned, adjustable springs for easy single-person operation
* Rear panel 300 mm, aluminum, plug-in design
* 1 toolbox in front of the front panel
* Excavator bucket rest made of hardwood, screwed onto the front panel
* 2 additional LED reversing lights
* 1 removable rotating LED warning light at the rear
* Height-adjustable support jacks at the front, folding supports at the rear
* Drawbar with 40 mm tow hitch, height-adjustable; 50 mm hitch also available on request
* In front of the front panel, device for the subsequent installation of 2 containers – locking mechanisms
* ----Leasing, hire purchase, financing, trade-in possible
* e.g. €585 net with a term of 60 months
* We have been a Müller Mitteltal sales partner for over 10 years
* Our opening hours
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
Outside of opening hours, we are available by appointment
Rcodpfo Af Dlcex Aiceh
We speak German, we speak English, mowimy po polsku, on parle français.
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2001
25 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 2404 ... ilmoitukset
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe


























































