Avoin perävaunu pressulla

Fliegl TPS 118 Durchladeanhänger 7,3 Meter

Please note: the images are archive photos. The vehicle may currently be in use!
# Chassis – centre-axle trailer
- Fine-grain steel welded construction, "10-year warranty against rust-through"
- Outer frame slightly inclined with "Load-Lock-Profil" for attaching lashing straps
- Gear-driven landing leg at front, folding rear support, side door stays
- Steel rear underrun protection, rear corner impact protection
- 1 spare wheel carrier for 1 spare wheel, with wheel fixing kit
- Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with padlock (padlock not included)
- Without ramps
- Platform height 1080 mm – observe overall height!
# Towing device – centre-axle trailer
- Drawbar with certified 40 mm towing eye, haulage version
- Drawbar mechanically height-adjustable via threaded spindle, below floor level, max. adjustment range 200 mm
- No drawbar length adjustment
# Axles + suspension
- BPW drum brake axles, air suspension
- Axles/running gear laser-aligned – reduces tyre wear and fuel consumption
# Braking system
- Dual-line compressed-air braking system, colour-coded lines for easy servicing
- Spring-brake parking brake
- Duomatic connection at front, with connecting line to towing vehicle
- EBS with EBS connector at front, with connecting cable
- Caution: the trailer may only be towed by vehicles ensuring the effectiveness of the ABS!
- Raise/lower valve, vehicle stability system
# Wheels and tyres
- 235/75 R17.5, make at manufacturer's discretion, steel rims factory silver
# Electrics
- 24 V, multi-chamber lamps, yellow LED side lighting
- 2 white front position lamps, 2 white/red outline marker lights at rear
- 1 x 15-pin connector at front, with connecting cable
# Floor
- Film-faced plywood approx. 30 mm, for high point loads
- Floor rated for forklift loads up to 2900 kg
- Platform length approx. 7300 mm
# Front wall / front corner posts
- Through-loading system with front portal doors, double-leaf, each with 2 internal cam-bar locks
- Steel corner posts, release device for side curtain
- Bridge plate approx. 2400 mm wide, divided once, approx. 350 mm long to rest on tail lift, capacity approx. 1800 kg, incl. tail lift support
- (Drawbar length then approx. 2100 mm; for 1800 mm tail lift, truck coupling set-back min. 20 to max. 240 mm)
# Centre stanchions
- 1 pair of sliding stanchions, movable over full length, with fourfold slat pockets and long pocket at bottom
- 1 pair of fixed stanchion positions
# Insert slats
- 5 rows of aluminium V-slats
# Rear wall / rear corner posts
Ksdpjz R Afysfx Abfodu
- Steel rear corner posts up to roof underside
- Curtain attachment with round tube, curtain tensioning ratchet
- Rear portal doors, double-leaf, each with 2 internal cam-bar locks
# Curtain
- Welded-in horizontal and vertical straps, stainless steel tensioning buckles
# Roof
- Sliding roof, slides from rear to front
- Rear end carriage folds upwards
- Curtain colour: white
- Optimised rain gutter at rear, on top of rear bow above doors
# Country of registration / plates
- Germany, with DEKRA inspection and expert report (acc. to §13 EG-FGV)
- 24/7 service hotline
- Fliegl manufacturer's certificate for body strength acc. to EN 12642 XL
- Prepared for single-line number plate holder
- White reflective strips: along bottom of side curtains and at top corners
- Red reflective strips: around rear portal