Avoin perävaunu pressulla

WECON APD 218*Volumen*Schiebeplane*Edscha*StaplerH

WECON rotating fifth wheel semi-trailer with sliding curtains
Viscount series
Type APD 218 740 SG
Loading length: approx. 7,300 mm
Loading width: approx. 2,480 mm
Interior height: approx. 2,850 mm
Single tires 445/45 R19.5
Riding height approx. 1,100 mm
Forklift attachment for forklift
Folding tail lights
for forklift attachment
Extendable drawbar pin 12 x 50 mm
Welded stake pocket, 12 pieces, inner dimension approx. 84x84 mm
Galvanized stake, matching the stake pocket
Dwjdoz N Rpkopfx Ab Hjc
Outer dimension approx. 80x80 mm, material thickness 4 mm
Length: approx. 1,800 mm, 4 pieces
Laminated wood floor, glued and overlaid, with screen-printed surface
approx. 30 mm thick, drivable with a forklift, suitable for an axle load of up to 5,460 kg
Low-maintenance air suspension axle,
Load capacity per axle 9,000 kg, lifting and lowering device with a total lifting stroke of approx. 180 mm,
Compressed air tank made of steel
Automatic, load-dependent, two-line pneumatic braking system according to ECE regulation with spring-loaded parking brake (incl. 1 release valve), EBS optional
according to the manufacturer's choice. Permanent transmission of axle loads to the
tractor unit via ABS/EBS
Connections for air: Duomatic coupling
Pallet stop edge on both sides, 30 mm high
Lashing options through oblong holes (approx. 15 x 30 mm)
Distance between the oblong holes approx. 200 mm, no oblong holes in the area of the
gripper edges at the gripper edges.
The internal loading height is reduced by 30 mm.
Steel front wall, smooth and screwed, including
in cassette construction over the entire height (cassettes galvanized)
Portal double-wing door, smooth, sandwich panel,
4 internal swivel bar locks, 4 hinges per door leaf.
Lateral sliding tarpaulin (quality 890 g/m²)
Roof: sliding cover, construction height 30 mm including
with aluminum guide rails.
Roof tarpaulin acc. to DIN EN 12641-2 (quality 890 g/m²
Lifting mechanism by means of rack and pinion gears, including
=> Lifting roof can be raised steplessly by 300 mm
=> Use of special corner and center beams in lifting roof design
TÜV certificate Code XL
The certificate confirms the load securing effect of the vehicle body. Requirements
according to VDI 2700, EN 283,
EN 12195 Part 1-2000, ADR and EN 12642 - Code XL are met.
TÜV certificate Code XL "Beverage transport"
Load securing certificate for beverage loads according to VDI 2700 sheet 12 and
VLB handbook (single-layer transport of crates)
TÜV certificate Code XL "Daimler Guideline 9.5"
-> Pallet stop edge on both sides required

Tires 445/45 R 19.5

Customs license plates and insurance available upon request for an additional fee! In export business, we can carry out the export declaration and approval for you against reimbursement of costs. When exporting to third countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery. For further information, please contact Mr. Lübberding on mobile/WhatsApp or Mr. Rohe! Always make an appointment for inspection/test drive! Just drop by. We look forward to your visit.

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.