Kippipuoliperävaunu

STAS ferroSTAR 68 cbm

ferroSTAR 68 cbm
Silver-grey
Chassis material: Steel
Chassis type: Z-chassis
Axle spacing (mm): 1310-1310
Fifth wheel height (mm): 1150
Chassis width (mm): 1400
The widest chassis on the market with 1400 mm for maximum stability and safer handling.
Load width (mm): 2325
Standard chassis: 110
Interior height, front (mm) (IHF): 2,460
Interior height, rear (mm) (IHB): 2,460
Dwjdpfjz Exbrsx Apbjd
Load length (mm): 11744
Overall width (mm): 2550
Volume (m³): 68.00
Wheelbase (mm) (WB): 7,753
Overall length (mm): 13,128

Axles: SAF
Axle version: Intra
Brake version: Disc brake
Brake type: SAF - SBS 2220 (Haldex)
Offset (ET): 120
Option 1: 1st axle with lift axle and starting assist
Starting assist activation: via button in the truck (button installation is not included in the scope of delivery) and by pressing the brake pedal three times.
Option 3: 3rd axle with lift axle
Brake pad wear indicator: connected
Return-to-ride (RTR): 15 km/h
Air spring protection plate
ECAS air suspension with raising and lowering valve
Automatic lowering of the air suspension during tilting, manually lockable via Smartboard, as well as switch on the chassis
Coupling head: Pneumatic, European Palm coupling
Control console: EBS control on the left side in the direction of travel, in front of the axles
Standard: Smartboard
Air and electrical console on the right side in the direction of travel

Support winch: Type JOST MODUL
Tires: Tire size 385/65R22.5
Tire pressure monitoring: Wabco OptiTire
Rims: Alcoa Dura Bright
TPMS sensor type: Rim-mounted sensor
TPMS sensor supplier: ZF
Wheel nut covers: Chrome-plated

Lighting manufacturer: Aspöck
Lighting type: ECOLED III - with STAS logo
2 LED reversing lights, rear, left and right in the direction of travel, mounted on the lamp carrier
Position of work lights (operated via switch): 2 LED reversing lights in the front, left and right in the direction of travel, mounted in the area of the support winches

Underrun protection
Operation of underrun protection: manual
Splash guard for underrun protection: Black with STAS logo

Tilting cylinder: Hyva (STAS manufacturer choice)
Type of tilting cylinder: Cylinder with small housing
Tilting cylinder angle: Normal ±47°
Tilting cylinder model: Hyva - FC 169
Stroke of tilting cylinder: 8130
Tilting cylinder max. PTO pressure: 250
Hydraulic coupling: Swivel coupling
Hydraulic coupling - size: 1
Hydraulic coupling - gender: Female
Hydraulic coupling - hose: 2,100 mm

Number of splash guards on the fender: 2 pieces
Toolbox
Aluminum extension ladder with a length of 2.8 m, mounted on the right side in the direction of travel
Broom and shovel holder with 3 holders each
Load pressure gauge: Ø 100 mm
Two plastic chock blocks

Structure:
Front wall inclination (°): 20
Rear wall inclination (°): 90
Front wall made of 3 mm HB450
Side wall made of 4/3 mm HB450
Floor made of 5 mm HB450
Position of rubber pads: mounted below the floor crossbeams
Rear wall type: Hinged doors
Rear wall made of 3 mm HB450
Number of hinges for rear wall: 3 pairs of door hinges
Design of hinged door: 1/2 to 1/2 split, with 1 piece of latch
Door wings open first on the right
The open door wings are secured by a chain
Seal for rear wall: with rubber seal in the lower area, extending 1,000 mm to the side
Additional locking mechanism for rear wall: pneumatically double-acting
Operation of the additional locking mechanism: manually via control on the side of the instrument panel
Steel crossbars in trapezoidal design, foldable
Number and positio

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.