Avoin puoliperävaunu pressulla

Fliegl 2-Achs Gardine TWIN Standard Xtra-Long

Please note: the pictures are archive images. The vehicle may currently be in use.
# Chassis – semi-trailer for general haulage
- Fine-grain steel welded construction
- Upper coupler plate with replaceable 2" kingpin
- Outer frame slightly inclined, with "Load-Lock" profile for attaching lashing straps
Prsdpfx Aez Egqzeppsb
- 24 t 2-speed landing gear, one-side operation, semi-round feet and straight mounting plate, with movable thrust compensation
- Folding rear support
- Pull-out ladder at rear
- Door retainers on sides
- Wheel chocks with holders
- Aluminium side underrun protection
- Galvanised steel rear underrun protection
- Quarter mudguards in front of and behind axle assembly
- Rear corner impact protection
- Ferry lashing eyes
- Pallet stops on both sides, approx. 15-20 mm high, bolted; loading height reduced by approx. 15-20 mm
- Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm
# Axles + suspension
- SAF disc brake axles, 430 mm disc diameter
- Axles/running gear laser-aligned: reduced tyre wear and fuel consumption
- Air suspension
- No lift axle
# Braking system
- Dual-line compressed air braking system
- Spring brake parking brake
- 2 polarity-protected coupling heads at front, without connecting hoses
- EBS (electronic braking system) with EBS socket at front, without connecting cable
- Raise/lower valve
- Roll stability system
- Axle load detection via EBS CAN bus signal for display in driver's cab; tractor unit must be prepared accordingly, no installation on the tractor unit (not a calibrated scale)
# Wheels and tyres
- 385/65 R22.5, brand at manufacturer's discretion
- Steel rims, factory silver
# Electrics
- 24 V
- LED multi-chamber lamps with resistor
- Yellow LED side marker lights
- LED number plate lighting
- 2 white LED front position lights
- 2 white/red LED rear outline marker lights
- 2 x 7-pin and 1 x 15-pin polarity-protected sockets at front, without connecting cables
- Additional LED work light at rear, switched via reversing light
- Reversing camera system with colour flat-screen monitor, wireless connection to screen, suction-cup mount, power supply via 24 V vehicle socket
# Floor
- Phenolic-coated plywood approx. 30 mm, transverse joints with omega inserts
- On longitudinal bearers for high point loads, forklift axle load up to max. 7100 kg
# Headboard/front corner posts
- Height 2 580 mm
- Reinforced steel corner posts
- Side curtain release device at headboard
- "Crash-Blocker", inside at bottom at approx. 140 mm height with steel impact protection
# Rear frame/rear corner posts
- Rear steel corner posts up to roof underside
- Curtain attachment with round tube and curtain tensioning ratchet
- Rear portal doors, 2-leaf, each with 2 internal locking bars
# Curtain
- Curtain with welded-in horizontal and vertical straps
- Stainless steel tensioning buckles
- Customer lettering on side curtains and rear portal
# Roof
- Sliding roof, slides from rear to front; rear roof lift folds upwards
- L-shaped roof rail for automotive industry, internal width between roof rails approx. 2 490 mm
- EcoLift lifting roof, raisable by approx. 380 mm on both sides, gas strut assisted
- Optimised rain gutter at rear, on top of rear roof bow above doors
Please note: archive images!