Matala puoliperävaunu rakennuskoneiden kuljetukseen

Faymonville 3-A-Tiefbett-Pendela.-Bolzen-Laschenkup.

You will receive an up-to-date and complete inspection and functional report for each used semi-trailer.

Gooseneck:
-Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm
-Gooseneck hydraulically extendable, retractable and lowerable
-For tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with an optional 1-axle dolly)

Low-bed:
-Low-bed with external supports, designed as a telescoping boiler bridge with a low overall height and extension at the front
-Length x width approx. 7,550 mm x 2,740 mm

Chassis:
-Diamond plate flooring and continuous prism-shaped excavator well approx. 1,450/900 x 505 mm, open at the rear

Axles, Suspension and Tires:
-"PENDEL-AXLE", all axles hydromechanically forced steering
-Final coat of paint on axles with 2 layers of 2-component paint, solid color in "FAY-Grey-34-0260"
-Technical axle load 12,000 kg
Dodpfszzn Naex Alcjkt
-Hydr. axle equalization
-245/70 R 17.5 3PMSF

Painting:
-Color of the semi-trailer MB 7350 Novagrau

Accessories:
-Steel front wall, plug-in, approx. 400 mm high
-4 pieces of wheel chocks with holder
-1 pair of steel ramps with climbing strips and fastening bolts to bridge the receiving hooks of the low-bed
-Mounting options for the steel loading ramps at the rear between the outer supports of the gooseneck
-One locking point approx. every 1,000 mm on the extension
-1 lashing ring each on the left and right on the front cross member
-6 pairs of threaded blocks on the outside of the inner supports of the loading platform for mounting screw-in rings M24
-2 pairs of screw-in rings M24
-6 pairs of recessed lashing rings on the outside of the outer supports of the loading platform, foldable inwards and outwards
-1 pair of threaded blocks at the front and rear on the outer supports of the loading platform for mounting screw-in rings M24
-1 pair of screw-in rings M24
-1 pair of lashing rings, lying at the rear in the excavator well of the rear chassis
-2 pairs of rung pockets embedded in the outer frame of the chassis, for plug-in rungs approx. 100 x 50 mm
-Attachment rail for loose ALU edge ramps on the end cross member of the vehicle
-Central lubrication system with 2 pumps, brand BEKAMAX
-Trailing steering at the front and rear, operable via cable remote control, with single-axle tracking
-3 kW electric-hydraulic unit
-1 spare wheel
-The first hole approx. 200 mm from the front, then every 400 mm
-2 pairs of screw-in lashing rings included
-1 lashing ring each on the left and right on the rear slope of the gooseneck
-On the gooseneck, 1 pair of plug-in ALU side walls, approx. 400 mm high, anodized
-On the gooseneck, a plug-in ALU rear wall, approx. 400 mm high, anodized
-Diamond plate flooring above the gooseneck
-3.5" kingpin
-Guide plate from the gooseneck for the fifth wheel plate, approx. 800 mm wide
-Hydr. cross member for supporting the gooseneck on the tractor unit or a dolly
-One compressed air connection in the rear area of the gooseneck including air gun
-Anti-slip adhesive on the left slope of the gooseneck
-Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings
-Removable loading floor (galvanized) in 3 elements can be inserted between the outer supports with hardwood flooring
-Folding wideners, approx. 230 mm per side
-Widening boards, loose, with steel edging
-4 warning signs approx. 423 x 423 mm
-Radio remote control for operating the trailing steering
-WABCO Smartboard System

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.