Avoin puoliperävaunu pressulla

WIELTON Curtain Standard NS3KM4* SAF*LiftA* 7x vorhanden

Chassis / Frame
Frame as a double longitudinal beam with cross members and outer frame welded together
Welded construction made of high-quality S700 steel in a weight-optimized design
Perforated outer frame with continuous lashing points for securing the load
SAFETY LOCK system, 60 holes per side for load securing
Holes and edges protected with rubber pads
Working area according to ISO1726:2003

Axles and Suspension
3 axles with 9,000 kg load capacity each
SAF axles with air suspension and disc brake (ET120)
Brake discs with 430 mm diameter
2" kingpin (corner dimension 2040 mm)
2 mechanical landing gears, manufacturer SAF
Single-sided landing gear operation, right side
1st axle as a lift axle

Podozw S Iropfx Aa Rora
Wheels and Tires
Tire size 6x 385/65 R 22.5
6 x steel rims (11.75x22.5) ET 120
Tread depths:
7/6 mm
14/12 mm
6/10 mm
Braking System
Braking system according to ECE directive
Dual-circuit compressed air braking system, manufacturer WABCO, ADR compliant
EBS system, WABCO System 2S/2M
Lifting and Lowering Device
Brake line connections at the front, in front of the end wall
Standard air connections according to ISO
Air tanks for braking system and air supply made of aluminum

Floor
30 mm thick, multi-layered glued, non-slip and waterproof screen-printed plywood floor, sealed at the cut edges
Floor sealing completely around
Pallet stop bar on both sides

Body
Body strength according to EN 12642 XL (VDI12700)
Front wall impact protection, inside plywood, 1500 mm high
3 pairs of center rails (each with 5 slat pockets)
Aluminum corner posts screwed on
4 rows of aluminum slats (100 mm)
1 row of aluminum slats at the bottom (150 mm)
Tarpaulin tensioning device at the rear as a ratchet, each at the rear right and left
Release device for side tarpaulin by means of a pivoting lever, each at the front right and left
Front wall made of aluminum according to VDI-DIN EN 12642 XL (pressure 13,500 daN)
2 sliding tarpaulins on the side according to VDI/DIN EN 12642 XL (pressure 10,800 daN)
with 18 tarpaulin tensioners on the side, tarpaulin material quality approx. 900 gr/m²
Rear wall as a double-wing portal door made of aluminum with double swivel bar locks
per door leaf according to VDI/DIN EN 12642 XL (pressure 8,100 daN)
Roof as a sliding tarpaulin, manufacturer Edscha HYBRYD, can be shifted on both sides
Diagonal bracing in the middle with plastic-covered wire ropes between the roof tarpaulin and
crossbars

Upon request, customs license plates and insurance can be provided for an extra charge! For export business, we can, upon request, carry out the export declaration and approval for you against reimbursement of costs. When exporting to third countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery.

For further information, please contact Mr. Lübberding on mobile/WhatsApp or Mr. Rohe!

Always make an appointment for inspection/test drive! Just drop by. We look forward to your visit.

Disclaimer: The information provided on the Internet is a non-binding description. It does not constitute guaranteed characteristics.

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.