Avoin puoliperävaunu

Fliegl 3-Achs Plateau Sattel SDS 380 Mega

#Plateau semi-trailer Mega
- Bespoke transport solution – configure your Fliegl vehicle to your requirements; vehicle shown is an example, production and equipment individually to customer specification
#Chassis – general haulage semi-trailer
- Fine-grain steel welded construction
- Fifth wheel plate with replaceable 2" kingpin
- Reinforced frame for high payload, also suitable for vehicle transport
- Outer frame with "Load-Lock-Profil" at approx. 400 mm centres for lashing strap attachment
- 10 pairs of lashing points recessed top/outside in outer frame, 10 t each
- Foldable rear support legs
- 2 wheel chocks with holder
- Aluminium side impact protection
- Galvanised steel underrun protection
- Quarter-shell mudguards ahead of axle 1 and behind each axle, with anti-spray flaps behind each axle
- 1 spare wheel holder for 1 spare wheel, with wheel fixing set
- 2 lockable plastic toolboxes, W=600/H=425/D=460 mm
- Container locks: 4 pairs recessed in floor for 2x20ft or 1x40ft containers, foremost position as recessed folding lock
- 10 pairs of stake pockets recessed in outer frame, 70x40 mm internal
- 10 stake pockets recessed centrally in floor, 70x40 mm internal
- 2 transverse lashing/stake rails recessed in floor, full width to outer frame, approx. 100 mm high, 20 mm round steel bars top and bottom (approx. 60 mm apart), angle-plate base, half open below, for lashing and fitting 80x80 mm stakes
#Arrangement
- Stake pocket positions 2 and 4 per Fliegl data sheet
- 20 plug-in stakes, hot-dip galvanised
- Storage space for aluminium loading ramps, ramps slide in from the rear
- 3 pairs of folding lashing eyes, 10 t, in outer frame
#Axles & suspension
- SAF disc-brake axles, air suspension
- Axle 1 as automatic lift axle, incl. forced lowering and traction aid, activated by braking three times
#Braking system
- 2-line air braking system, colour-coded lines for easy servicing
- Spring-loaded parking brake
- 2 anti-mismatch coupling heads at front, no connecting line
- EBS with front EBS socket, no connecting cable
- Lift/lower valve, 2 ride heights adjustable via hand control (1x 980 mm, 1x 1100 mm coupling height)
- Ride height linked to lift axle: raising lift axle increases loading/overall height by 50 mm
- Trailer stability system
#Wheels & tyres
- 435/50 R19.5 steel wheels
#Electrics
- 24 V, multi-chamber lights
- Yellow LED side marker lights
- 2 white LED front position lights
- 2 white/red outline marker lights at rear
- 2x 7-pin and 1x 15-pin anti-mismatch sockets at front
- LED work lights at sides, 1x left and 1x right (direction of travel)
- 2 additional LED work lights at rear
Fsdpfxozwn Izo Ab Hepn
- 1 beacon with holder, switched via side lights
- 2 pairs of LED-illuminated warning boards, extendable to 4,000 mm
- Additional 7-pin socket in underrun protection
#Floor
- Phenolic plywood floor approx. 30 mm thick, on longitudinal sub-frames for high point loads, forklift axle load up to max. 7,100 kg
#Front wall / front corner posts
- 25 mm aluminium hollow profile, 1,350 mm high
- Solid steel corner posts (closed, heavy-duty version)
- Front wall internally fitted with additional 1,250 mm high phenolic panel ("Crash-Blocker")
- Steel impact protection at approx. 140 mm height on lower interior
- Internal storage compartment for plug-in stakes