Vaihtolava-puoliperävaunuKÖGEL
Port 40 simplex, pneumatischer Heckausschub
Vaihtolava-puoliperävaunu
KÖGEL
Port 40 simplex, pneumatischer Heckausschub
Kiinteä hinta alv 0% (veroton)
14 750 €
(17 552 € bruttomassa)
Kunto
Käytetty
Sijainti
Essen 

Perustiedot
Hinta ja sijainti
Kiinteä hinta alv 0% (veroton)
14 750 €
(17 552 € bruttomassa)
- Myyjän sijainti:
- Heegstraße 6-8, 45356 Essen, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 34 250 kg
- Kokonaispaino:
- 39 500 kg
- Akselikokoonpano:
- 3 akselia
- Ensirekisteröinti:
- 10/2022
- Seuraava tarkastus (TÜV):
- 04/2027
- Varusteet:
- ABS
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A223-02-507
- Viitenumero:
- 31624
- Päivitys:
- viimeksi 29.08.2026
Kuvaus
Excerpt of Equipment
Braking System
* Complies with ECE-R13
Electrical System
* Complies with ECE-R48
* The Kögel superstructure guidelines must be observed! They can be accessed at [website address].
Frame / Chassis Frame
* Made of high-quality steel, but without an outer frame
* Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337
* With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended)
* b) 2 x 20' ISO containers (frame extended)
* c) 1 x 30' ISO container flush with the rear (frame extended)
* d) 1 x 20' ISO container flush with the rear (frame retracted)
* e) 1 x 20' ISO container in the middle (frame retracted)
* 4 pairs of heavy-duty lashing rings
* Frame extension at the rear, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable
* Length adjustable via 1 pneumatic cylinder, low-maintenance guidance on special plastic sliders and 2 extension rollers
* Automatic pneumatic locking of the extension
Suspension
* Axle lift mechanism on the axle
* Control of the axle lift fully automatic, load-dependent
* Starting aid: Activation via 3x brake, 30% overload up to a speed of 25 km/h
* Operation on the chassis via a switch
* Also possible from the driver's cab (switch in the cab is necessary - PIN 12)
* Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, ET 120
* Air suspension with approx. 180 mm suspension travel
Tires
* 6 x 385/55 R 22.5, 160J (manufacturer of our choice)
* 6 steel rims 22.5 x 11.75, offset 120 mm (ET 120)
Chassis Components
* Kingpin supports (manufacturer at Kögel's choice) mechanically with leveling foot, 24 t lifting capacity
* Single-sided operation on the right side of the direction of travel
* Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires consisting of
* 3 pairs of semi-circular fenders with mud flaps
* 2 support wedges with holder
* Lateral protection device, according to ECE-R73
* Closed underrun protection made of square steel tube according to ECE-R58 with an
* protected lighting carrier arranged above it. Height of the underrun protection profile min. 120 mm, designed for increased test forces
Brake / Air Suspension System
* EBS system 2S/2M with stability program (includes ABS/ALB function)
* EBS connector ISO 7638, (without connection cables)
* Parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 connector
* Air suspension system incl. 1 lifting and lowering valve, mounted on the left side in the direction of travel in front of the axle unit
* 2 tamper-proof coupling heads at the front ISO 1728
* Air tanks for brake system and air supply made of steel (EN 286-2)
* Rear impact guard Steel rear impact guard, solid, on the rear end crossmember
Electrical / Electronic System
* Lighting carrier made of steel, arranged above the underrun protection
Pedozkx Hnjpfx Akqjgr
KÖGEL LUXIMA Premium Package, consisting of
* LED license plate lighting
* LED side marker lights and reflectors at the front
* Flashing LED side marker lights
* Superseal and bayonet connectors for the lights
* 2 LED outline lights with arms, mounted on multi-chamber tail light
* 2 LED multi-chamber tail lights (without LCG)
* Front connector 15-pole ISO 12098 (without connection cables)
* Complies with vehicle class FL
* AT Information Systems Kögel Telematics System Basic
* Trailer incl. location monitoring,
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Braking System
* Complies with ECE-R13
Electrical System
* Complies with ECE-R48
* The Kögel superstructure guidelines must be observed! They can be accessed at [website address].
Frame / Chassis Frame
* Made of high-quality steel, but without an outer frame
* Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337
* With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended)
* b) 2 x 20' ISO containers (frame extended)
* c) 1 x 30' ISO container flush with the rear (frame extended)
* d) 1 x 20' ISO container flush with the rear (frame retracted)
* e) 1 x 20' ISO container in the middle (frame retracted)
* 4 pairs of heavy-duty lashing rings
* Frame extension at the rear, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable
* Length adjustable via 1 pneumatic cylinder, low-maintenance guidance on special plastic sliders and 2 extension rollers
* Automatic pneumatic locking of the extension
Suspension
* Axle lift mechanism on the axle
* Control of the axle lift fully automatic, load-dependent
* Starting aid: Activation via 3x brake, 30% overload up to a speed of 25 km/h
* Operation on the chassis via a switch
* Also possible from the driver's cab (switch in the cab is necessary - PIN 12)
* Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, ET 120
* Air suspension with approx. 180 mm suspension travel
Tires
* 6 x 385/55 R 22.5, 160J (manufacturer of our choice)
* 6 steel rims 22.5 x 11.75, offset 120 mm (ET 120)
Chassis Components
* Kingpin supports (manufacturer at Kögel's choice) mechanically with leveling foot, 24 t lifting capacity
* Single-sided operation on the right side of the direction of travel
* Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires consisting of
* 3 pairs of semi-circular fenders with mud flaps
* 2 support wedges with holder
* Lateral protection device, according to ECE-R73
* Closed underrun protection made of square steel tube according to ECE-R58 with an
* protected lighting carrier arranged above it. Height of the underrun protection profile min. 120 mm, designed for increased test forces
Brake / Air Suspension System
* EBS system 2S/2M with stability program (includes ABS/ALB function)
* EBS connector ISO 7638, (without connection cables)
* Parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 connector
* Air suspension system incl. 1 lifting and lowering valve, mounted on the left side in the direction of travel in front of the axle unit
* 2 tamper-proof coupling heads at the front ISO 1728
* Air tanks for brake system and air supply made of steel (EN 286-2)
* Rear impact guard Steel rear impact guard, solid, on the rear end crossmember
Electrical / Electronic System
* Lighting carrier made of steel, arranged above the underrun protection
Pedozkx Hnjpfx Akqjgr
KÖGEL LUXIMA Premium Package, consisting of
* LED license plate lighting
* LED side marker lights and reflectors at the front
* Flashing LED side marker lights
* Superseal and bayonet connectors for the lights
* 2 LED outline lights with arms, mounted on multi-chamber tail light
* 2 LED multi-chamber tail lights (without LCG)
* Front connector 15-pole ISO 12098 (without connection cables)
* Complies with vehicle class FL
* AT Information Systems Kögel Telematics System Basic
* Trailer incl. location monitoring,
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2003
74 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 201 8... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe















