RullavavaunuMÜLLER-MITTELTAL
18 t.Außenroller Container Anhänger, 2 in 1
Rullavavaunu
MÜLLER-MITTELTAL
18 t.Außenroller Container Anhänger, 2 in 1
Kiinteä hinta alv 0% (veroton)
37 500 €
(44 625 € bruttomassa)
Valmistusvuosi
2026
Kunto
Käytetty
Sijainti
Egestorf 

Perustiedot
Hinta ja sijainti
Kiinteä hinta alv 0% (veroton)
37 500 €
(44 625 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 13 700 kg
- Kokonaispaino:
- 18 000 kg
- Akselikokoonpano:
- 2 akselia
- Ensirekisteröinti:
- 03/2026
- Seuraava tarkastus (TÜV):
- 03/2027
- Kuormatilan pituus:
- 7 000 mm
- Lastitilan leveys:
- 2 480 mm
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A222-55-687
- Viitenumero:
- 6371a
- Päivitys:
- viimeksi 21.07.2026
Kuvaus
* TRA 18.0:
* 2 in 1 = for roll-off containers and as a low-bed trailer
----Brakes:
* EBS electronic braking system
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 10-ton Gigant axles
----Suspension:
* Air suspension with lifting and lowering system and RTR valve
Kjdpozihciefx Ap Hsna
----Drawbar:
* Curved drawbar, 2,000 mm long, with pivoting drawbar eye 40 / 50 mm (without 8° eye)
* GHD height adjustment system instead of drawbar spring
----Electrical system / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation -
* LED tail lights 12 / 24 V
* 15-pole power socket
----General components:
* Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm
* Spare wheel holder on the right side
* Reflective contour marking on the sides and rear
* Side impact protection
* Plastic quarter fender with splash guard
* Plastic impact protection buffer at the rear
* Foldable A-frame sign at the rear
----Loading area:
* Main frame with raised outer frame for guiding the roll-off containers
* Sheet steel floor with recesses for the rollers in the bogie area
* Continuous length of 5,500 - 7,000 mm possible
* Pneumatic 4-point clamping locking system and mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722 - 1
* Welded bead as anti-slip coating in the track area of the ramp
* Mechanical support legs at the rear
----Load securing:
* 1 pair of 10-ton UVV lashing rings at the front on the end wall support
* 3 pairs of 10-ton UVV lashing rings on the sides in the outer frame
* 4 x 2-ton lashing eyes in cloverleaf design on each side
* 4 x 8-ton lashing brackets embedded in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps (10.6 tons / pair) 2,800 x 470 mm, suitable for vehicles with rubber tires and tracked vehicles (lockable storage compartment from the rear)
----Painting:
* Chassis, bogie, locking parts, rear support legs hot-dip galvanized
* but the drawbar, axles and air tank are painted in a black tone
----Information:
* Vehicle has full manufacturer's warranty until 03/2027
* Errors and prior sale are subject to change
* The trailer is in new condition and has only been used a maximum of 5 times
----Delivery time:
* Available for immediate delivery from Egestorf near the A7
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
* 2 in 1 = for roll-off containers and as a low-bed trailer
----Brakes:
* EBS electronic braking system
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 10-ton Gigant axles
----Suspension:
* Air suspension with lifting and lowering system and RTR valve
Kjdpozihciefx Ap Hsna
----Drawbar:
* Curved drawbar, 2,000 mm long, with pivoting drawbar eye 40 / 50 mm (without 8° eye)
* GHD height adjustment system instead of drawbar spring
----Electrical system / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation -
* LED tail lights 12 / 24 V
* 15-pole power socket
----General components:
* Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm
* Spare wheel holder on the right side
* Reflective contour marking on the sides and rear
* Side impact protection
* Plastic quarter fender with splash guard
* Plastic impact protection buffer at the rear
* Foldable A-frame sign at the rear
----Loading area:
* Main frame with raised outer frame for guiding the roll-off containers
* Sheet steel floor with recesses for the rollers in the bogie area
* Continuous length of 5,500 - 7,000 mm possible
* Pneumatic 4-point clamping locking system and mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722 - 1
* Welded bead as anti-slip coating in the track area of the ramp
* Mechanical support legs at the rear
----Load securing:
* 1 pair of 10-ton UVV lashing rings at the front on the end wall support
* 3 pairs of 10-ton UVV lashing rings on the sides in the outer frame
* 4 x 2-ton lashing eyes in cloverleaf design on each side
* 4 x 8-ton lashing brackets embedded in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps (10.6 tons / pair) 2,800 x 470 mm, suitable for vehicles with rubber tires and tracked vehicles (lockable storage compartment from the rear)
----Painting:
* Chassis, bogie, locking parts, rear support legs hot-dip galvanized
* but the drawbar, axles and air tank are painted in a black tone
----Information:
* Vehicle has full manufacturer's warranty until 03/2027
* Errors and prior sale are subject to change
* The trailer is in new condition and has only been used a maximum of 5 times
----Delivery time:
* Available for immediate delivery from Egestorf near the A7
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2001
170 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 40 33... ilmoitukset
Nämä ilmoitukset voivat myös kiinnostaa sinua.
Pieni ilmoitus
Egestorf
1 343 km
Matala lavetti perävaunu
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Pieni ilmoitus
Heteren
1 633 km
Nosturiauto
ScaniaR 500 8x4 HMF 5020-K6 + JIB FJ 1000-K5
ScaniaR 500 8x4 HMF 5020-K6 + JIB FJ 1000-K5
Pieni ilmoitus
Egestorf
1 343 km
Rullavavaunu
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Pieni ilmoitus
Egestorf
1 343 km
Rullavavaunu
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Pieni ilmoitus
Andelst
1 638 km
Alusta ja ohjaamo
ScaniaR540 NGS 8X2 CHASSIS NIEUW/NEUE/NEW FULL OPTION...
ScaniaR540 NGS 8X2 CHASSIS NIEUW/NEUE/NEW FULL OPTION...
Pieni ilmoitus
Burghaun
1 584 km
Teleskooppikuormaaja
MagniTH 3.6-D5/D / 3to - 5,8m / 75PS
MagniTH 3.6-D5/D / 3to - 5,8m / 75PS
Pieni ilmoitus
Andelst
1 638 km
Alusta ja ohjaamo
ScaniaR540 NGS 8X2 CHASSIS NIEUW/NEUE/NEW FULL OPTION...
ScaniaR540 NGS 8X2 CHASSIS NIEUW/NEUE/NEW FULL OPTION...
Pieni ilmoitus
Dortmund
1 603 km
Matalakuormaaja-puoliperävaunu
Meusburger3-Achs-Semi mit 2 Paar Radmulden
Meusburger3-Achs-Semi mit 2 Paar Radmulden
Pieni ilmoitus
Fürth
1 720 km
Teleskooppivarsi haarukkatrukki
DIECIRUNNER 40.13 TURBO 4x4x4 - 12.4 m / 4 t.
DIECIRUNNER 40.13 TURBO 4x4x4 - 12.4 m / 4 t.
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe












































































































































































































































