Ikäyvä lattiasemitraileri

STAS Biostar 91m³

Biostar 91m³
iced Mercury Metallic

Manufacturer: STAS
Model: BIOSTAR - RIGID AXLES - V13500 - VERTICAL

_____
Vehicle Data:

Internal length of the body: 13500 MM
Internal width of the body: 2460 MM
Internal height of the body: 2650/2825 MM
Volume of the body: 91 m³
GVW: 36 T
Wheelbase: 1310 MM
Saddle height: 1150-1180 MM

1. CHASSIS

High-quality construction made of steel S355JR (= ST52.3).
Chassis not painted, but galvanized (EN ISO 1461), hot-dip galvanizing.

SAF axles
Suspension: Original SAF air suspension
Brakes: large disc - INTEGRAL
Offset: ET 120
Njdpfxjzgzqbj Altocu
Brake wear indicator is connected.

The first and third axles are automatic lift axles. (automatic lifting when unladen,
automatic lowering when loaded)
The lift axles are controlled via the EBS-E system.
Both axles lift separately.

The starting aid is activated by pressing a button in the truck.

Air suspension with lifting and lowering device
Aluminum air tank
6 x 385/65 R 22.5 on aluminum rims ALCOA DURA BRIGHT. ET 120
Weweler with equalizing pads for air-suspended vehicles. Mechanical version with
single-sided operation and 2 speed stages.

EBS-E system WABCO 2S/2M - PREMIUM MODULATOR
Spring brake parking brake acting on 2 axles
With SMARTBOARD
R.S.S. (Roll Stability System)

24 Volt electrical system. 2 x 7-pole + 1 x 15-pole sockets ISO connection. Aspöck set
Orange LED lighting is mounted on the side of the semi-trailer.

The lighting is mounted in the fixed aluminum underrun guard.
With aluminum lighting protection (foldable)
2 x 3 round LED lights - 1 x round rear fog light - 1 x
LED work/reversing light LED WORKPOINT

2 x LED WORKPOINT work lights in front of the axles and 2 x behind the axles - with
switch on the control console.

1 work light on a tripod on the front wall - with switch at the front.

HYDRAULIC SYSTEM
Pressure: ? Female
Return: 1 Female

Hydraulic hoses 3/4 - 1, length 3,000 mm

Connection on the front wall, lines with a downward bend. With additional connection option
below the body in front of the support legs.

With air connection mounted at the rear on the console with a 14-meter hose and pistol.
Loading pressure gauge mounted on the console (in addition to the Smartboard).
Extendable ladder integrated in the rear of the vehicle, on the right.

With pneumatic central locking.

With standard side impact protection.

2. BODY

The front wall consists of 30 mm thick aluminum plank profiles, type 600, reinforced corner joints.

Fixed sealing between the floor and the front wall by means of an aluminum profile and PVC sealing.

Side walls in smooth design, inside and outside. Double-walled side wall profiles 600 mm
wide - 30 mm thick - 3 mm inside - 2 mm outside (grain version). The side wall profiles are
welded continuously on the inside.

Wear plate in aluminum, rectangular, on the inside at the rear, 3000 x 2000 x 4 mm.

CARGO FLOOR CF 500 SL-C
Loading - stop - unloading via switch.
Manual emergency operation by means of a unique red Cargo rotary knob.

21 aluminum floorboards - 10 mm ribbed with welded aluminum end caps.

2 portal rear doors in smooth design, made of aluminum plank profiles, type 600.
Door frame completely welded to the side walls (inside + outside).
With pivoting door closing crossbar (opens to the left).
Complete emptying wall, consisting of aluminum plank profiles - 2 side stripping brushes and additional.

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.