Avoin perävaunu pressulla

FLIEGL Tandem-Seitenkipper TSK 180 - 5 Meter

Custom-made transport solution
Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs.

Chassis, central axle tipping trailer
Steel welded construction, continuous tipping axle at the rear with 100 mm ball bearing, geared support leg at the front
Chocks with holder, 2 underride guards made of steel, quarter-shell fenders
Coupling device for central axle trailer
Drawbar (2,100 mm) with tested 50 mm towing eye
Axles + Suspension
Drum brake axles, "axle/chassis laser-aligned," reducing tire wear and fuel consumption, air suspension without lift/lower valve
Wheels and tires
385 / 65 R 22.5", according to manufacturer's choice, steel rims in factory silver
Braking system
2-line pneumatic braking system, spring-loaded parking brake, 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, EBS, electronic braking system with EBS plug at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!
Electrical system
24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 2 x 7-pole fail-safe plugs at the front, with connection cable
Hydraulics
Three-way tipping mechanism, hydraulic multi-piston press with stroke limitation and safety cable, hydraulic connection with SVK plug NW 10/3, including connecting hose, operation hydraulically via truck auxiliary drive; tipping angle approx.: 47/50 °
Tipping platform
Steel sheet floor, 4 mm thick, ball bearing at the rear, 100 mm diameter, sideboard construction steel, side walls divided with 1 pair of fixed center rails. Sideboards (900 mm) foldable and pivotally mounted with central locking at the bottom. Side walls with 3 hinges per sideboard at the bottom. Rear wall pivotally mounted, with automatic opening.
Approval / Signage
Country of approval: Germany, with Dekra inspection and certificate (according to §13 EG - FGV), 24/7 service hotline
Prepared for single-row license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear
Painting
Frame: DB 7350 Novagrau
Sideboards / platform: galvanized or painted according to customer requirements

Custom-made transport solution
Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs.
Fjdpezcyl Rofx Aqrjph

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.