RullakonttiDecker Containerbau
Abrollcontainer, Entsorgung, ca. 34m³
Rullakontti
Decker Containerbau
Abrollcontainer, Entsorgung, ca. 34m³
Valmistusvuosi
2026
Kunto
Uusi
Sijainti
Sankt Wolfgang 

Perustiedot
Hinta ja sijainti
- Sijainti:
- Am Schmiedanger 11, 84427 Sankt Wolfgang, Deutschland

Soita
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A220-79-328
- Päivitys:
- viimeksi 08.06.2026
Kuvaus
Roll-off container, for waste disposal, approx. 34 m³
Immediately available from 84427 St. Wolfgang, subject to prior sale.
Internal dimensions: L 6000 x W 2380 x H 2400 mm
Base
Dcsdszb H Naspfx Ah Eeh
5 mm steel, S235 grade
Rounded base, radius 250 mm to side wall
Subframe construction
Subframe made of INP 180
UVV tested according to DIN 30722-1 (15,000 kg)
C-locking system: Standard
External rollers, lubricatable and replaceable
Wall
3 mm steel, S235 grade
Girder spacing 750 mm
Girder profile 80 x 50 x 4 mm
Continuous circular tube frame 90/5.6 mm, fully welded
All-round tarpaulin and net hooks
End wall
Hook height 1570 mm
Screw-on ladder on the end face, according to DIN RAL 3002 carmine red
Special equipment:
Reinforced lifting bracket, 60 mm
Rear
Wing doors with double door locking, Dutch fastener
Road locking with over-center toggle
Paint finish
Primed inside and outside
Additionally, exterior coated with synthetic resin paint in RAL 7015 slate gray
Tested according to DGUV 214-017
Suitable for hook lift trailers such as Pronar, Krampe and Fliegl
- Subject to prior sale -
Available from 84427 St. Wolfgang
Payment terms: 100% before loading.
The goods remain our property until full payment is received.
Our general terms and conditions apply.
Offer is non-binding and without guarantee.
We will gladly prepare a non-binding offer for you.
You can find our complete product range at decker-containerbau.com
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Immediately available from 84427 St. Wolfgang, subject to prior sale.
Internal dimensions: L 6000 x W 2380 x H 2400 mm
Base
Dcsdszb H Naspfx Ah Eeh
5 mm steel, S235 grade
Rounded base, radius 250 mm to side wall
Subframe construction
Subframe made of INP 180
UVV tested according to DIN 30722-1 (15,000 kg)
C-locking system: Standard
External rollers, lubricatable and replaceable
Wall
3 mm steel, S235 grade
Girder spacing 750 mm
Girder profile 80 x 50 x 4 mm
Continuous circular tube frame 90/5.6 mm, fully welded
All-round tarpaulin and net hooks
End wall
Hook height 1570 mm
Screw-on ladder on the end face, according to DIN RAL 3002 carmine red
Special equipment:
Reinforced lifting bracket, 60 mm
Rear
Wing doors with double door locking, Dutch fastener
Road locking with over-center toggle
Paint finish
Primed inside and outside
Additionally, exterior coated with synthetic resin paint in RAL 7015 slate gray
Tested according to DGUV 214-017
Suitable for hook lift trailers such as Pronar, Krampe and Fliegl
- Subject to prior sale -
Available from 84427 St. Wolfgang
Payment terms: 100% before loading.
The goods remain our property until full payment is received.
Our general terms and conditions apply.
Offer is non-binding and without guarantee.
We will gladly prepare a non-binding offer for you.
You can find our complete product range at decker-containerbau.com
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2023
25 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 8081 ... ilmoitukset
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe








