Matala lavetti perävaunuMÜLLER-MITTELTAL
ETÜTAR 14,4 Tieflader, LED, Runduml.
Matala lavetti perävaunu
MÜLLER-MITTELTAL
ETÜTAR 14,4 Tieflader, LED, Runduml.
Kiinteä hinta alv 0% (veroton)
26 500 €
(31 535 € bruttomassa)
Valmistusvuosi
2026
Kunto
Uusi
Sijainti
Alsdorf 

Perustiedot
Hinta ja sijainti
Kiinteä hinta alv 0% (veroton)
26 500 €
(31 535 € bruttomassa)
- Myyjän sijainti:
- Carl - Zeiss - Straße 26, 52477 Alsdorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 10 950 kg
- Kokonaispaino:
- 14 400 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 6 270 mm
- Lastitilan leveys:
- 2 470 mm
- Varusteet:
- ABS, takalaitanostin
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A220-57-293
- Viitenumero:
- 31941
- Päivitys:
- viimeksi 04.06.2026
Kuvaus
Müller-Mitteltal ETÜ-TA-R 14.4 Tandem – Low-loader – Platform – Trailer
Available from the 37th week of 2026, inquiry number: 31941. Delivery to your address is possible.
* We would be happy to provide you with an individual offer.
Blodpfx Aozbfmqodyoh
* ----
* GVWR: 14.4t, Payload: 10.95t
* LED lighting system
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
* Tire pressure monitoring system (TPMS)
* 6.27m x 2.47m platform with galvanized front wall 400mm
* Excavator bucket rest made of hardwood, screwed onto the front wall
* Unladen floor height 930mm / Laden floor height 870mm
* One-piece ramps with hot-dip galvanized grating, slip-resistant design, can be pushed together to approx. 20 mm, secured by retaining rods and inclined support.
* Ramp lifter with vertically mounted, adjustable springs for easy one-person operation.
* 4 UVV lashing eyes (LC 6300daN)
* Perforated outer frame (45° bent with hole pattern for lashing straps, lashing force per lashing point LC 2000 daN at a distance of min. 480 mm. Installation of UVV lashing eyes LC 3000 daN at a distance of approx. 600 mm is possible) with close transverse profiling, high-flanged front and rear end and rear access ramp, hot-dip galvanized.
* 10 UVV lashing eyes LC 3000 daN, can be recessed into the existing hole pattern in the outer frame, in addition
* Further lashing possibilities through holes (Ø 50 mm, LC 1200 daN) in the front and end beams
* Tool box in front of the front wall
* Side marker lights with turn signal control
* Softwood floor, 50 mm thick. Chassis hot-dip galvanized
* Height-adjustable support jacks at the front, folding supports at the rear.
* 2 container locking devices recessed in the front beam
* Drawbar with 40mm drawbar eye (hot-dip galvanized), height adjustable, a 50mm eye is also possible on request
* 1 removable LED marker light at the rear ----
* Leasing, hire purchase, financing, and trade-in are possible.
* e.g. 525 Euros with a 60-month term, no down payment, no residual value.
* ----
* Our opening hours:
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
Outside of opening hours, we are available by appointment.
We speak German, we speak English, mowimy po polsku, on parle français
Leasing, financing, and trade-in are possible.
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Available from the 37th week of 2026, inquiry number: 31941. Delivery to your address is possible.
* We would be happy to provide you with an individual offer.
Blodpfx Aozbfmqodyoh
* ----
* GVWR: 14.4t, Payload: 10.95t
* LED lighting system
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
* Tire pressure monitoring system (TPMS)
* 6.27m x 2.47m platform with galvanized front wall 400mm
* Excavator bucket rest made of hardwood, screwed onto the front wall
* Unladen floor height 930mm / Laden floor height 870mm
* One-piece ramps with hot-dip galvanized grating, slip-resistant design, can be pushed together to approx. 20 mm, secured by retaining rods and inclined support.
* Ramp lifter with vertically mounted, adjustable springs for easy one-person operation.
* 4 UVV lashing eyes (LC 6300daN)
* Perforated outer frame (45° bent with hole pattern for lashing straps, lashing force per lashing point LC 2000 daN at a distance of min. 480 mm. Installation of UVV lashing eyes LC 3000 daN at a distance of approx. 600 mm is possible) with close transverse profiling, high-flanged front and rear end and rear access ramp, hot-dip galvanized.
* 10 UVV lashing eyes LC 3000 daN, can be recessed into the existing hole pattern in the outer frame, in addition
* Further lashing possibilities through holes (Ø 50 mm, LC 1200 daN) in the front and end beams
* Tool box in front of the front wall
* Side marker lights with turn signal control
* Softwood floor, 50 mm thick. Chassis hot-dip galvanized
* Height-adjustable support jacks at the front, folding supports at the rear.
* 2 container locking devices recessed in the front beam
* Drawbar with 40mm drawbar eye (hot-dip galvanized), height adjustable, a 50mm eye is also possible on request
* 1 removable LED marker light at the rear ----
* Leasing, hire purchase, financing, and trade-in are possible.
* e.g. 525 Euros with a 60-month term, no down payment, no residual value.
* ----
* Our opening hours:
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
Outside of opening hours, we are available by appointment.
We speak German, we speak English, mowimy po polsku, on parle français
Leasing, financing, and trade-in are possible.
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2001
27 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 2404 ... ilmoitukset
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe




























