Tukkipuoliperävaunu

Fliegl 3-Achs Holzrungensattel SDS 390 L=13,5m

Chassis, Semi-trailer, Transport Company
Steel welded construction in reinforced design, only 2 longitudinal members as double T-beams with steel/diamond-plate between the longitudinal members, kingpin plate with replaceable 2" kingpin. Mudguard for tail lights.
8 pairs of lashing eyes screwed or welded to the frame, at the manufacturer's discretion.
24 tons, 2-speed support legs, single-sided operation, with straight lower part, without thrust compensation.
Chocks with holder.
Aluminum side impact protection.
Galvanized steel underrun protection.
Half-shell fenders with anti-spray flaps according to EC.
1 spare wheel holder for 1 spare wheel, with wheel fastening kit.
1 storage box recessed between the longitudinal members.
8 pieces of wood rack supports, at the manufacturer's discretion, screwed to the frame, each with 2 extendable wood racks from 1800 to 2800 mm, 7 tons per pair.
Axles + Suspension
BPW disc brake axles with 430 mm disc diameter.
Air suspension with lift and lower valve, safety cable on the axles.
1st axle automatic lift axle, including forced lowering and starting aid, operated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h).
Axle spacing staggered 1410/1310 mm (combined transport) up to 44 tons total weight.
Wheels and Tires
385 / 65 R 22.5"
at the manufacturer's discretion.
Steel rims, factory silver.
Braking System
2-line pneumatic braking system.
Spring-loaded parking brake.
Axle load recognition via EBS-CAN bus signal, for display on the dashboard in the cab; the truck must be correspondingly prepared, no truck installation (no calibrated scale).
2 non-interchangeable coupling heads at the front, without connecting cable.
EBS, electronic braking system with EBS socket at the front, without connecting cable.
Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS!
"Safe Parking"
Electrical System
24 Volt, multi-chamber lights, yellow LED lighting on the sides.
2 white position lights at the front.
2 white/red marker lights at the rear.
2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable.
Front wall / corner posts
Steel / grid front wall, approx. 2300 mm high, screwed to the frame.
Approval / Signs
Country of approval: Germany.
Type approval according to EC 2007/46.
Prepared for single-row license plate holder.
Bjdpfxoza Anvo Adyolh
Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear.
Warning sign according to ECE - 70.
Paint
Frame: DB 7350 Novagrau (dark grey)
Support legs: Black coated.
Front wall: Hot-dip galvanized.

Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.