Kolmisuuntainen kippiperävaunuMEILLER
MZDA 18.23, linke SW abklappbar und Pendelnd
Kolmisuuntainen kippiperävaunu
MEILLER
MZDA 18.23, linke SW abklappbar und Pendelnd
Kiinteä hinta alv 0% (veroton)
34 950 €
(41 590 € bruttomassa)
Valmistusvuosi
2025
Kunto
Uusi
Sijainti
Egestorf 

Perustiedot
Hinta ja sijainti
Kiinteä hinta alv 0% (veroton)
34 950 €
(41 590 € bruttomassa)
- Myyjän sijainti:
- Eichenstich 12, 21272 Egestorf, Saksa

Soita
Tekniset tiedot
- Maksimi kuormauspaino:
- 13 500 kg
- Kokonaispaino:
- 18 000 kg
- Akselikokoonpano:
- 2 akselia
- Kuormatilan pituus:
- 4 900 mm
- Lastitilan leveys:
- 2 380 mm
- Kuormatilan korkeus:
- 900 mm
Tarjouksen tiedot
- Ilmoituksen tunnus:
- A219-77-908
- Viitenumero:
- 6336
- Päivitys:
- viimeksi 22.05.2026
Kuvaus
Brakes:
* Wabco TEBS-E / ABS (electronic braking system with RSS)
* Emergency release system for spring brake cylinders
* Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums
----Axles:
* BPW or SAF axles
----Suspension:
* Air suspension
* Automatic rapid lowering during the tipping process to increase stability (can be deactivated for asphalt pavers)
----Electrical System / Lighting:
* Tire pressure monitoring system (TPMS)
* 5-chamber tail lights with protective cover
* 15-pole power connector
----Drawbar / Flange Coupling:
* Curved central tube drawbar with height-adjustable 50 mm flange coupling (tipping via the drawbar is possible, but the tipping angle is limited and depends on the tractor unit)
----General Components:
* Aluminum air reservoir
* Welded box-type steering linkage
* Front support winch
* Underrun protection at the rear
* Enclosed plastic fenders
* Access ladder on the front left, outside the front wall
----Tipping Body:
* Steel 3-sided tipping body with M-Jet sideboards
* Front wall made of 3 mm STEELECT 240 steel
* Side walls with stable, continuous, inwardly inclined top rail
* Side walls and rear gate made of 4 mm STEELECT steel (HBW 400)
* Continuous side walls - without center stringer
* Right side wall swings open via manual central locking - preparation for long lever and hinges for the fold-down side wall
* Left side wall swings open via manual central locking and can be folded down with a sideboard spring lifter
* Rear gate swings open with automatic cam lock and 150 mm rear tailgate
* Manual dosing system via chain
* 5 mm bridge floor made of STEELECT steel (HBW 450 steel)
----Painting:
Kjdpfx Ahsy T A Hyetelt
* Chassis painted in RAL 7021 black-gray
* Painting of the sideboards in RAL 9006 white aluminum
----General Information:
* Vehicle body complies with EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Sample images (may include special equipment)
* 2 units available
----Delivery Time:
* Available from week 22/2026
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
* Wabco TEBS-E / ABS (electronic braking system with RSS)
* Emergency release system for spring brake cylinders
* Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums
----Axles:
* BPW or SAF axles
----Suspension:
* Air suspension
* Automatic rapid lowering during the tipping process to increase stability (can be deactivated for asphalt pavers)
----Electrical System / Lighting:
* Tire pressure monitoring system (TPMS)
* 5-chamber tail lights with protective cover
* 15-pole power connector
----Drawbar / Flange Coupling:
* Curved central tube drawbar with height-adjustable 50 mm flange coupling (tipping via the drawbar is possible, but the tipping angle is limited and depends on the tractor unit)
----General Components:
* Aluminum air reservoir
* Welded box-type steering linkage
* Front support winch
* Underrun protection at the rear
* Enclosed plastic fenders
* Access ladder on the front left, outside the front wall
----Tipping Body:
* Steel 3-sided tipping body with M-Jet sideboards
* Front wall made of 3 mm STEELECT 240 steel
* Side walls with stable, continuous, inwardly inclined top rail
* Side walls and rear gate made of 4 mm STEELECT steel (HBW 400)
* Continuous side walls - without center stringer
* Right side wall swings open via manual central locking - preparation for long lever and hinges for the fold-down side wall
* Left side wall swings open via manual central locking and can be folded down with a sideboard spring lifter
* Rear gate swings open with automatic cam lock and 150 mm rear tailgate
* Manual dosing system via chain
* 5 mm bridge floor made of STEELECT steel (HBW 450 steel)
----Painting:
Kjdpfx Ahsy T A Hyetelt
* Chassis painted in RAL 7021 black-gray
* Painting of the sideboards in RAL 9006 white aluminum
----General Information:
* Vehicle body complies with EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Sample images (may include special equipment)
* 2 units available
----Delivery Time:
* Available from week 22/2026
Ilmoitus on käännetty automaattisesti. Käännösvirheitä saattaa esiintyä.
Toimittaja
Huomautus: Rekisteröidy ilmaiseksi tai kirjaudu sisään, saadaksesi kaikki tiedot.
Rekisteröitynyt vuodesta: 2001
170 Verkkoilmoitukset
Lähetä kysely
Puhelin & Faksi
+49 40 33... ilmoitukset
Ilmoituksesi on poistettu onnistuneesti
Tapahtui virhe


